Center for Nanoscience and Nanotechnology (C2N), University-Paris-Saclay, 91120 Palaiseau, France.
Department of Mechanical Engineering, Sogang University, Mapo-gu, Seoul 04107, Korea.
Sensors (Basel). 2020 Sep 3;20(17):5009. doi: 10.3390/s20175009.
This paper presents an autonomous energy harvester based on a textile-based enzymatic biofuel cell, enabling an efficient power management and on-demand usage. The proposed biofuel cell works by an enzymatic reaction with glucose in sweat absorbed by the specially designed textile for sustainable and efficient energy harvesting. The output power of the textile-based biofuel cell has been optimized by changing electrode size and stacking electrodes and corresponding fluidic channels suitable for following power management circuit. The output power level of single electrode is estimated less than 0.5 μW and thus a two-staged power management circuit using intermediate supercapacitor has been presented. As a solution to produce a higher power level, multiple stacks of biofuel cell electrodes have been proposed and thus the textile-based biofuel cell employing serially connected 5 stacks produces a maximal power of 13 μW with an output voltage of 0.88 V when load resistance is 40 kΩ. A buck-boost converter employing a crystal oscillator directly triggered by DC output voltage of the biofuel cell makes it possible to obtain output voltage of the DC-DC converter is 6.75 V. The efficiency of the DC-DC converter is estimated as approximately 50% when the output power of the biofuel cell is tens microwatts. In addition, LT-spice modeling and simulation has been presented to estimate power consumption of each element of the proposed DC-DC converter circuit and the predicted output voltage has good agreement with measurement result.
本文提出了一种基于纺织基酶生物燃料电池的自主能量收集器,实现了高效的能量管理和按需使用。所提出的生物燃料电池通过与汗液中葡萄糖的酶反应工作,汗液由专门设计的纺织品吸收,可实现可持续和高效的能量收集。通过改变电极尺寸和堆叠电极以及相应适合后续功率管理电路的流体通道,优化了纺织基生物燃料电池的输出功率。单个电极的输出功率水平估计小于 0.5μW,因此提出了两级功率管理电路,使用中间超级电容器。为了产生更高的功率水平,提出了多个堆叠的生物燃料电池电极,因此,采用串联连接 5 个堆叠的纺织基生物燃料电池可产生 13μW 的最大功率,当负载电阻为 40kΩ 时,输出电压为 0.88V。采用直接由生物燃料电池的直流输出电压触发的晶体振荡器的降压-升压转换器可使 DC-DC 转换器的输出电压达到 6.75V。当生物燃料电池的输出功率为数十微瓦时,DC-DC 转换器的效率估计约为 50%。此外,还提出了 LT-spice 建模和仿真,以估计所提出的 DC-DC 转换器电路的每个元件的功耗,并且预测的输出电压与测量结果具有良好的一致性。