Suppr超能文献

己烷-1,2,5,6-四醇作为一种通用的生物基构建单元用于合成可持续(手性)结晶介孔聚硼酸盐。

Hexane-1,2,5,6-tetrol as a Versatile and Biobased Building Block for the Synthesis of Sustainable (Chiral) Crystalline Mesoporous Polyboronates.

作者信息

De Bruyn Mario, Cuello-Penaloza Paolo, Cendejas Melissa, Hermans Ive, He Jiayue, Krishna Siddarth H, Lynn David M, Dumesic James A, Huber George W, Weckhuysen Bert M

机构信息

Department of Chemical and Biological Engineering, University of Wisconsin-Madison, 1415 Engineering Drive, Madison, Wisconsin 53706, United States.

Faculty of Science, Debye Institute for Nanomaterials Science, Utrecht University, Universiteitsweg 99, 3584 CG Utrecht, The Netherlands.

出版信息

ACS Sustain Chem Eng. 2019 Aug 5;7(15):13430-13436. doi: 10.1021/acssuschemeng.9b02772. Epub 2019 Jul 3.

Abstract

We report on the synthesis and characterization of novel mesoporous chiral polyboronates obtained by condensation of (,)/(,)-hexane-1,2,5,6-tetrol (HT) with simple aromatic diboronic acids (e.g., 1,3-benzenediboronic acid) (BDB). HT is a cellulose-derived building block comprising two 1,2-diol structures linked by a flexible ethane bridge. It typically consists of two diastereomers one of which [(,)-HT] can be made chirally pure. Boronic acids are abundantly available due to their importance in Suzuki-Miyaura coupling reactions. They are generally considered nontoxic and easy to synthesize. Reactive dissolution of generally sparingly soluble HT with BDB, in only a small amount of solvent, yields the mesoporous HT/polyboronate materials by spontaneous precipitation from the reaction mixture. The 3D nature of HT/polyboronate materials results from the entanglement of individual 1D polymeric chains. The obtained BET surface areas (SAs) and pore volumes (PVs) depend strongly on HT's diastereomeric excess and the meta/para orientation of the boronic acids on the phenyl ring. This suggests a strong influence of the curvature(s) of the 1D polymeric chains on the final materials' properties. Maximum SA and PV values are respectively 90 m g and 0.44 mL g. Variably sized mesopores, spanning mainly the 5-50 nm range, are evidenced. The obtained pore volumes rival the ones of some covalent organic frameworks (COFs), yet they are obtained in a less expensive and more benign fashion. Moreover, currently no COFs have been reported with pore diameters in excess of 5 nm. In addition, chiral boron-based COFs have presently not been reported. Scanning electron microscopy reveals the presence of micrometer-sized particles, consisting of aggregates of plates, forming channels and cell-like structures. X-ray diffraction shows the crystalline nature of the material, which depends on the nature of the aromatic diboronic acids and, in the specific case of 1,4-benzenediboronic acid, also on the applied diastereomeric excess in HT.

摘要

我们报道了通过(,)/(,)-己烷-1,2,5,6-四醇(HT)与简单的芳族二硼酸(例如1,3-苯二硼酸)(BDB)缩合得到的新型介孔手性聚硼酸盐的合成与表征。HT是一种纤维素衍生的结构单元,包含两个由柔性乙烷桥连接的1,2-二醇结构。它通常由两种非对映异构体组成,其中一种[(,)-HT]可以制成手性纯的。硼酸由于在铃木-宫浦偶联反应中的重要性而大量可得。它们通常被认为无毒且易于合成。在仅少量溶剂中,通常微溶的HT与BDB发生反应溶解,通过从反应混合物中自发沉淀得到介孔HT/聚硼酸盐材料。HT/聚硼酸盐材料的三维性质源于单个一维聚合物链的缠结。所获得的BET表面积(SAs)和孔体积(PVs)强烈依赖于HT的非对映体过量以及硼酸在苯环上的间/对取向。这表明一维聚合物链的曲率对最终材料性能有很大影响。最大SA和PV值分别为90 m g和0.44 mL g。证实存在尺寸可变的介孔,主要跨度为5 - 50 nm。所获得的孔体积与一些共价有机框架(COFs)的孔体积相当,但它们是以成本更低且更环保的方式获得的。此外,目前尚未报道孔径超过5 nm的COFs。另外,目前尚未报道手性硼基COFs。扫描电子显微镜显示存在微米级颗粒,由板状聚集体组成,形成通道和细胞状结构。X射线衍射表明材料的晶体性质,这取决于芳族二硼酸的性质,并且在1,4-苯二硼酸的特定情况下,还取决于HT中所施加的非对映体过量。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/ded6/7493417/4738d3fbe0ae/sc9b02772_0001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验