Cene Vinicius Horn, Balbinot Alexandre
IEEE Trans Neural Syst Rehabil Eng. 2020 Nov;28(11):2507-2514. doi: 10.1109/TNSRE.2020.3024947. Epub 2020 Nov 6.
Reliable control of assistive devices using surface electromyography (sEMG) remains an unsolved task due to the signal's stochastic behavior that prevents robust pattern recognition for real-time control. Non-representative samples lead to inherent class overlaps that generate classification ripples for which the most common alternatives rely on post-processing and sample discard methods that insert additional delays and often do not offer substantial improvements. In this paper, a resilient classification pipeline based on Extreme Learning Machines (ELM) was used to classify 17 different upper-limb movements through sEMG signals from a total of 99 trials derived from three different databases. The method was compared to a baseline ELM and a sample discarding (DISC) method and proved to generate more stable and consistent classifications. The average accuracy boost of ≈ 10% in all databases lead to average weighted accuracy rates higher as 53,4% for amputees and 89,0% for non-amputee volunteers. The results match or outperform related works even without sample discards.
由于表面肌电图(sEMG)信号的随机行为,妨碍了用于实时控制的稳健模式识别,因此使用表面肌电图可靠地控制辅助设备仍然是一项未解决的任务。非代表性样本会导致固有的类别重叠,从而产生分类波动,对此最常见的解决方法依赖于后处理和样本丢弃方法,这些方法会增加额外延迟,而且通常不会带来显著改进。在本文中,基于极限学习机(ELM)的弹性分类流程被用于通过来自三个不同数据库的总共99次试验的sEMG信号对17种不同的上肢运动进行分类。该方法与基线ELM和样本丢弃(DISC)方法进行了比较,结果证明能产生更稳定、更一致的分类。在所有数据库中平均准确率提高了约10%,使得截肢者的平均加权准确率高于53.4%,非截肢志愿者的平均加权准确率高于89.0%。即使不进行样本丢弃,结果也与相关研究相当或更优。