Li Zhigang, Guan Zhongxiang, Guan Zhiping, Liang Ce, Yu Kaifeng
Key Laboratory of Automobile Materials, Ministry of Education, College of Materials Science and Engineering, Jilin University, Changchun, 130025, China.
Institute of Superplastic and Plastic of Jilin University, Changchun, 130025, China.
Nanoscale Res Lett. 2020 Oct 1;15(1):193. doi: 10.1186/s11671-020-03422-w.
The cryogenic process has been widely applied in various fields, but it has rarely been reported in the preparation of anode materials for lithium-ion battery. In this paper, activated carbon derived from hemp stems was prepared by carbonization and activation; then, it was subjected to cryogenic treatment to obtain cryogenic activated carbon. The characterization results show that the cryogenic activated carbon (CAC) has a richer pore structure than the activated carbon (AC) without cryogenic treatment, and its specific surface area is 1727.96 m/g. The porous carbon had an excellent reversible capacity of 756.8 mAh/g after 100 cycles at 0.2 C as anode of lithium-ion battery, in which the electrochemical performance of CAC was remarkably improved due to its good pore structure. This provides a new idea for the preparation of anode materials for high-capacity lithium-ion batteries.
低温工艺已在各个领域得到广泛应用,但在锂离子电池负极材料的制备中却鲜有报道。本文通过碳化和活化制备了源自麻茎的活性炭;然后对其进行低温处理以获得低温活性炭。表征结果表明,低温活性炭(CAC)比未经低温处理的活性炭(AC)具有更丰富的孔隙结构,其比表面积为1727.96 m²/g。作为锂离子电池负极,该多孔碳在0.2 C下循环100次后具有756.8 mAh/g的优异可逆容量,其中CAC因其良好的孔隙结构而使电化学性能得到显著改善。这为高容量锂离子电池负极材料的制备提供了新思路。