Organometallics & Smart Materials Laboratory, Department of Chemistry, Indian Institute of Science Education and Research (IISER) Bhopal, Bhopal 462066, India.
Organometallics & Smart Materials Laboratory, Department of Chemistry, Indian Institute of Science Education and Research (IISER) Bhopal, Bhopal 462066, India.
J Hazard Mater. 2021 Mar 5;405:124242. doi: 10.1016/j.jhazmat.2020.124242. Epub 2020 Oct 12.
Chromium(VI), especially dichromate (CrO) contamination in wastewater due to rapid industrialization with uncontrolled effluent management is still a serious concern which needs focused attention. Multiprong approaches are practiced such as chemical precipitation, reverse osmosis, ion-exchange, adsorption by granular activated carbon etc. to capture and separate this "Group A" human carcinogenic effluent from water. However, low capture capacity, non-reusability, poor selectivity, pH-limited performance are some major limitations of these techniques. Recently, metal organic frameworks (MOFs), metal organic cages (MOCs), porous organic polymers (POPs) or covalent organic frameworks (COFs), covalent organic networks (CONs) etc. emerged as new-generation materials to overcome such limitations. However, the development is still in initial stage and issues related to structural stability and integrity of many MOFs in water and in wide pH range, as well as reusability need to be addressed. At this juncture, herein we report a novel [Zn(terpyridine)]-templated trisimidazolium-based highly cationic three-dimensional metal-organic coordination assembly (3D MOCA), serving as a new class of efficient, fast, robust and recyclable dichromate-removal material. Not only the highly cationic assembly is enriched with a high density of Br anions, but its three-dimensional propagation and flexibility also exposes the exchangeable Br ions for facile anion-metathesis with CrO. By virtue of the benefits of these attributes, the presented supramolecular material exhibits a high capture capacity (469 mg g), fast exchange kinetics (0.028 g mg min), wide working pH range (pH 2-12) and reusability up to a minimum of 10 cycles without much loss of efficiency. Key mechanistic examinations highlight the evidences in favor of ion-exchange-based chemistry to be responsible for dichromate removal with the present material.
六价铬(VI),尤其是由于工业废水管理失控而导致的废水中的重铬酸盐(CrO )污染,仍然是一个需要重点关注的严重问题。目前采用了多种方法,如化学沉淀、反渗透、离子交换、颗粒活性炭吸附等,以捕获和分离这种“ A 类”人类致癌废水。然而,这些技术存在捕获能力低、不可重复使用、选择性差、pH 限制性能等主要局限性。最近,金属有机骨架(MOFs)、金属有机笼(MOCs)、多孔有机聚合物(POPs)或共价有机骨架(COFs)、共价有机网络(CONs)等新兴材料作为新一代材料来克服这些限制。然而,发展仍处于初期阶段,许多 MOFs 在水中和宽 pH 范围内的结构稳定性和完整性以及可重复使用性等问题仍需解决。在这一关键时刻,本文报道了一种新型[Zn(三联吡啶)]-模板三咪唑基基于高度正电荷的三维金属-有机配位组装体(3D MOCA),它是一种新型的高效、快速、稳健和可回收的重铬酸盐去除材料。不仅高度正电荷的组装体富含高密度的 Br 阴离子,而且其三维传播和灵活性也暴露了可交换的 Br 离子,便于与 CrO 进行阴离子交换。由于这些特性的优势,所提出的超分子材料表现出高的捕获能力(469mg g)、快速的交换动力学(0.028g mg min)、宽的工作 pH 范围(pH 2-12)和可重复使用性,至少可重复使用 10 次,而效率损失很小。关键的机制研究强调了基于离子交换的化学是负责用本材料去除重铬酸盐的证据。