Tian Zhong-Ke, Wang Fen, Yan Zhao
School of Environmental Science and Engineering, Tianjin University, Tianjin 300350, China.
Huan Jing Ke Xue. 2020 Nov 8;41(11):5106-5113. doi: 10.13227/j.hjkx.202003166.
Anaerobic digestion is widely used for sewage sludge stabilization. Different anaerobic digestion methods have different impacts on the speciation and stability of heavy metals in sludge. This study investigated the response of the speciation and stability of heavy metals in sludge to the treatment of mesophilic anaerobic digestion-mechanical dewatering and thermal hydrolysis pre-treatment-thermophilic anaerobic digestion. The results showed that the process of mesophilic anaerobic digestion increased the contents of Cd, Cr, Cu, Ni, and Zn in the sludge, increasing its contamination level and potential ecological risks. In contrast, the thermophilic anaerobic digestion process increased the contents of Cd, Cr, and Pb in the sludge, reducing the level of heavy metal contamination and potential ecological risks. It was found that the main contaminated metals were Cd and Zn in Plant N and Cd in Plant S. Cd has the highest risk factor and is the highest risk contributor to the potential ecological risk of all the types of sludge. The sum of reducible and the exchangeable fractions of Cd, Ni, Pb, and Zn reduced, and the residual fraction of Cd, Cr, Cu, and Ni decreased after mesophilic anaerobic digestion. This indicated that the process of mesophilic anaerobic digestion changed the proportion of potential toxicity and steady state of the heavy metals into direct toxicity. After thermophilic anaerobic digestion, the exchangeable proportion of Cd, Cr, Cu, Pb, and Zn decreased, and the steady state of Cd, Cr, Cu, Ni, Pb, and Zn decreased. After the thermophilic anaerobic digestion process, the proportions of bio-availability and mobility of heavy metals therefore decreased, and the proportions of steady state also reduced. The potential toxicity increased.
厌氧消化被广泛用于污水污泥的稳定化处理。不同的厌氧消化方法对污泥中重金属的形态和稳定性有不同影响。本研究调查了污泥中重金属形态和稳定性对中温厌氧消化 - 机械脱水以及热水解预处理 - 高温厌氧消化处理的响应。结果表明,中温厌氧消化过程增加了污泥中镉、铬、铜、镍和锌的含量,提高了其污染水平和潜在生态风险。相比之下,高温厌氧消化过程增加了污泥中镉、铬和铅的含量,降低了重金属污染水平和潜在生态风险。研究发现,N厂主要的污染金属为镉和锌,S厂为镉。镉具有最高的风险因子,是所有类型污泥潜在生态风险的最高风险贡献者。中温厌氧消化后,镉、镍、铅和锌的可还原态与可交换态之和降低,镉、铬、铜和镍的残留态减少。这表明中温厌氧消化过程将重金属潜在毒性和稳态的比例转变为直接毒性。高温厌氧消化后,镉、铬、铜、铅和锌的可交换态比例降低,镉、铬、铜、镍、铅和锌的稳态降低。因此,高温厌氧消化过程后,重金属的生物可利用性和迁移性比例降低,稳态比例也降低。潜在毒性增加。