Department of Chemical Engineering, University of Castilla La Mancha, Campus Universitario s/n. 13071, Ciudad Real, Spain.
Department of Chemical Engineering, University of Castilla La Mancha, Campus Universitario s/n. 13071, Ciudad Real, Spain.
J Environ Manage. 2021 Feb 1;279:111597. doi: 10.1016/j.jenvman.2020.111597. Epub 2020 Nov 7.
This work aims to assess the influence of ultrasounds (US) application or ultraviolet (UV) light irradiation on the efficiency and sustainability of the treatment of wastes by conductive diamond electrochemical oxidation (CDEO). To do this, a life cycle assessment (LCA) is carried out in order to quantify the environmental impacts of the intensified CDEO processes. Inventories of three bench scale remediation plants (CDEO, Sono-CDEO and Photo-CDEO) in which the different technologies are implemented are performed by means of Ecoinvent 3.3 data base. AWARE, USEtox, IPPC and ReCiPe methodologies are used to quantify the environmental burden into 5 midpoint (water footprint, global warming 100a, ozone layer depletion, human toxicity, freshwater ecotoxicity) and 17 endpoint impact categories. Photo-CDEO attains the faster and more efficient removal in terms of energy consumed. All impact categories are lower in the case in which UV light irradiation is coupled to the CDEO treatment, particularly if the electrolyte does not contain chloride anions. From the point of view of toxicity and ecotoxicity, it is essential to achieve a complete mineralization, because of the intermediates generated into wastes containing chloride anions can become more hazardous than the initial pesticide. The operation of these technologies at large current densities shows positive results from the sustainability point of view, despite the huge environmental impact related to the energy production. Data notice that almost a 99.0% of the total global warming potential is mainly due to the electricity required during the electrochemical treatment, being higher by the sono and photo CDEO treatments because of the use of additional devices. Nevertheless, this issue can be overcome by means of using renewable energies as power sources of these remediation treatments. According to results, it can be claimed that the electrochemical technologies may successfully compete with other AOPs in terms of sustainability.
本工作旨在评估超声(US)应用或紫外(UV)光照射对导电金刚石电化学氧化(CDEO)处理废物的效率和可持续性的影响。为此,进行了生命周期评估(LCA),以量化强化 CDEO 过程的环境影响。通过 Ecoinvent 3.3 数据库对三个 bench scale 修复工厂(CDEO、 Sono-CDEO 和 Photo-CDEO)中的不同技术实施情况进行清查。使用 AWARE、USEtox、IPPC 和 ReCiPe 方法学将环境负担量化为 5 个中点(水足迹、100a 年全球变暖、臭氧层消耗、人类毒性、淡水生态毒性)和 17 个终点影响类别。Photo-CDEO 在消耗的能量方面达到更快和更有效的去除。在将 UV 光照射与 CDEO 处理耦合的情况下,所有影响类别都较低,特别是如果电解液不含有氯阴离子。从毒性和生态毒性的角度来看,必须实现完全的矿化,因为在含有氯阴离子的废物中生成的中间体可能比初始农药更具危害性。从可持续性的角度来看,这些技术在大电流密度下的运行显示出积极的结果,尽管与能源生产相关的环境影响巨大。数据表明,几乎 99.0%的总全球变暖潜能主要归因于电化学处理所需的电力,由于 Sono 和 Photo CDEO 处理中使用了额外的设备,因此这两种处理的全球变暖潜能更高。然而,通过使用可再生能源作为这些修复处理的电源,可以克服这个问题。根据结果,可以声称电化学技术在可持续性方面可以成功地与其他高级氧化工艺竞争。