Suppr超能文献

近红外光谱(NIRS)探头的精确图像引导(重新)放置

Accurate Image-guided (Re)Placement of NIRS Probes.

作者信息

Wu Shin-Ting, Rubianes Silva José Angel Iván, Novi Sergio Luiz, de Souza Nicolas Gabriel S R, Forero Edwin Johan, Mesquita Rickson C

机构信息

School of Computer and Electrical Engineering, University of Campinas, Av. Albert Einstein 400, Campinas, SP 13083-852, Brazil.

School of Computer and Electrical Engineering, University of Campinas, Av. Albert Einstein 400, Campinas, SP 13083-852, Brazil.

出版信息

Comput Methods Programs Biomed. 2021 Mar;200:105844. doi: 10.1016/j.cmpb.2020.105844. Epub 2020 Nov 21.

Abstract

BACKGROUND AND OBJECTIVE

Functional near-infrared spectroscopy (fNIRS) has become an attractive choice to neuroscience because of its high temporal resolution, ease of use, non-invasiveness, and affordability. With the advent of wearable fNIRS technology, on-the-spot studies of brain function have become viable. However, the lack of within-subject reproducibility is one of the barriers to the full acceptability of fNIRS. To support the validation of the claim that within-subject reproducibility of fNIRS could benefit from accurate anatomical information, we present in this paper a method to develop an image-based system that improves the placement of the sensors on the scalp at interactive rates.

METHODS

The proposed solution consists of an electromagnetic digitizer and an interactive visualization system that allows monitoring the movements of the digitizer on a real head with respect to the underlying cerebral cortical structures. GPU-based volume raycasting rendering is applied to unveil these structures from the corresponding magnetic resonance imaging volume. Scalp and cortical surface are estimated from the scanned volume to improve depth perception. An alignment algorithm between the real and scanned heads is devised to visually feedback the position of the stylus of the digitizer. Off-screen rendering of the depthmaps of the visible surfaces makes spatial positioning of a 2D interaction pointer possible.

RESULTS

We evaluated the alignment accuracy using four to eight anatomical landmarks and found seven to be a good compromise between precision and efficiency. Next, we evaluated reproducibility in positioning five arbitrarily chosen points on three volunteers by four operators over five sessions. In every session, seven anatomical landmarks were applied in the alignment of the real and the scanned head. For the same volunteer, one-way analysis of variance (ANOVA) revealed no significant differences within the five points digitized by the same operator over five sessions (α = 0.05). In addition, preliminary study of motor cortex activation by right-hand finger tapping showed the potential of our approach to increase functional fNIRS reproducibility.

CONCLUSIONS

Results of experiments suggest that the enhancement of the visualization of the location of the probes on the scalp, relative to the underlying cortical structures, improves reproducibility of fNIRS measurements. As further work, we plan to study the fNIRS reproducibility in other cortical regions and in clinical settings using the proposed system.

摘要

背景与目的

功能近红外光谱技术(fNIRS)因其高时间分辨率、易用性、非侵入性和可承受性,已成为神经科学领域颇具吸引力的选择。随着可穿戴fNIRS技术的出现,对脑功能进行现场研究成为可能。然而,缺乏受试者内的可重复性是fNIRS被全面接受的障碍之一。为支持关于fNIRS受试者内可重复性可受益于准确解剖信息这一说法的验证,我们在本文中提出一种方法,用于开发基于图像的系统,该系统能以交互速率改善传感器在头皮上的放置。

方法

所提出的解决方案包括一个电磁数字化仪和一个交互式可视化系统,该系统允许监测数字化仪在真实头部上相对于潜在大脑皮质结构的移动。基于图形处理器(GPU)的体绘制技术被用于从相应的磁共振成像体数据中揭示这些结构。从扫描的体数据中估计头皮和皮质表面,以改善深度感知。设计了一种真实头部与扫描头部之间的对齐算法,以便直观地反馈数字化仪触笔的位置。可见表面深度图的离屏渲染使得二维交互指针的空间定位成为可能。

结果

我们使用四到八个解剖标志评估了对齐精度,发现七个标志在精度和效率之间达到了良好的平衡。接下来,我们评估了四名操作员在五个时间段内对三名志愿者的五个任意选择点进行定位的可重复性。在每个时间段内,在真实头部与扫描头部的对齐中使用了七个解剖标志。对于同一名志愿者,单因素方差分析(ANOVA)显示,同一名操作员在五个时间段内对五个点进行数字化操作时,没有显著差异(α = 0.05)。此外,通过右手手指敲击对运动皮质激活的初步研究表明了我们的方法在提高功能性fNIRS可重复性方面的潜力。

结论

实验结果表明,相对于潜在的皮质结构,增强头皮上探头位置的可视化可提高fNIRS测量的可重复性。作为进一步的工作,我们计划使用所提出的系统研究其他皮质区域和临床环境中的fNIRS可重复性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验