Al-Falahi Adil, Alobaid Falah, Epple Bernd
Institut Energiesysteme und Energietechnik, Technische Universität Darmstadt, Otto-Berndt-Straße 2, 64287 Darmstadt, Germany.
Entropy (Basel). 2020 Oct 16;22(10):1165. doi: 10.3390/e22101165.
The main objective of this paper is to simulate solar absorption cooling systems that use ammonia mixture as a working fluid to produce cooling. In this study, we have considered different configurations based on the ammonia-water (NH-HO) cooling cycle depending on the solar thermal technology: Evacuated tube collectors (ETC) and parabolic trough (PTC) solar collectors. To compare the configurations we have performed the energy, exergy, and economic analysis. The effect of heat source temperature on the critical parameters such as coefficient of performance (COP) and exegetic efficiency has been investigated for each configuration. Furthermore, the required optimum area and associated cost for each collector type have been determined. The methodology is applied in a specific case study for a sports arena with a 700~800 kW total cooling load. Results reveal that (PTC/NH-HO)configuration gives lower design aspects and minimum rates of hourly costs (USD 11.3/h) while (ETC/NH-HO) configuration (USD 12.16/h). (ETC/NH-HO) gives lower thermo-economic product cost (USD 0.14/GJ). The cycle coefficient of performance (COP) (of 0.5).
本文的主要目的是模拟以氨混合物作为工作流体来产生制冷效果的太阳能吸收式制冷系统。在本研究中,我们基于氨 - 水(NH₃ - H₂O)制冷循环,根据太阳能热技术考虑了不同的配置:真空管集热器(ETC)和抛物槽式(PTC)太阳能集热器。为了比较这些配置,我们进行了能量、㶲和经济分析。针对每种配置,研究了热源温度对诸如性能系数(COP)和㶲效率等关键参数的影响。此外,还确定了每种集热器类型所需的最佳面积和相关成本。该方法应用于一个总制冷负荷为700 - 800千瓦的体育馆的具体案例研究。结果表明,(PTC/NH₃ - H₂O)配置具有较低的设计指标和最低的小时成本率(11.3美元/小时),而(ETC/NH₃ - H₂O)配置为(12.16美元/小时)。(ETC/NH₃ - H₂O)具有较低的热经济产品成本(0.14美元/吉焦)。循环性能系数(COP)为0.5。