Chowdhury Emdadul Haque, Rahman Md Habibur, Bose Pritom, Jayan Rahul, Islam Md Mahbubul
Department of Mechanical Engineering, Bangladesh University of Engineering and Technology, Dhaka 1000, Bangladesh.
Phys Chem Chem Phys. 2020 Dec 23;22(48):28238-28255. doi: 10.1039/d0cp04785f.
Bismuthene has opened up a new avenue in the field of nanotechnology because of its spectacular electronic and thermoelectric features. The strong spin-orbit-coupling enables its operation as the largest nontrivial bandgap topological insulator and quantum spin hall material at room temperature, which is unlikely for any other 2D material. It is also known to be the most promising thermoelectric material due to its remarkable thermoelectric properties, including a substantially high power factor. However, an in-depth understanding of the mechanical and thermal transport properties of bismuthene is crucial for its practical implementation and efficient operation. Employing the Stillinger-Weber potential, we utilized molecular dynamics simulations to inspect the mechanical strength and thermal conductivity of the monolayer β-bismuthene for the first time. We analyzed the effect of temperature on the tensile mechanical properties along the armchair and zigzag directions of bismuthene nanosheets and found that increasing temperature causes a significant deterioration in these properties. The material shows superior fracture resistance with zigzag loading, whereas the armchair direction exhibits an improved elasticity. Next, we showed that increasing vacancy concentration and crack length notably reduce the fracture stress and strain of β-bismuthene. Under all these conditions, β-bismuthene showed a strong chirality effect under tensile loading. We also explored the fracture phenomena of a pre-cracked β-bismuthene, which reveal that the armchair-directed crack possesses a higher fracture resistance than the zigzag-directed crack. Interestingly, branching phenomena occurred during crack propagation for the armchair crack; meanwhile, the crack propagates perpendicular to loading for the zigzag crack. Afterward, we investigated the effect of loading rate on the fracture properties of bismuthene along the armchair and zigzag directions. Finally, we calculated the thermal conductivity of bismuthene under the influence of temperature and vacancy and recorded a substantial decrement in thermal conductivity with increasing temperature and vacancy. The obtained results are comprehensively discussed in the light of phonon density of states, phonon dispersion spectrum, and phonon group velocities. It is also disclosed that the thermal conductivity of β-bismuthene is considerably lower than that of other analogous honeycomb structures. This study can add a new dimension to the successful realization of bismuthene in future (opto)electronic, spintronic, and thermoelectric devices.
由于其出色的电子和热电特性,铋烯在纳米技术领域开辟了一条新途径。强大的自旋轨道耦合使其能够作为室温下最大的非平凡带隙拓扑绝缘体和量子自旋霍尔材料运行,这对于任何其他二维材料来说都是不太可能的。由于其卓越的热电性能,包括相当高的功率因数,它也被认为是最有前途的热电材料。然而,深入了解铋烯的机械和热输运性质对于其实际应用和高效运行至关重要。利用斯蒂林格 - 韦伯势,我们首次使用分子动力学模拟来研究单层β - 铋烯的机械强度和热导率。我们分析了温度对铋烯纳米片沿扶手椅方向和锯齿方向的拉伸力学性能的影响,发现温度升高会导致这些性能显著恶化。该材料在锯齿加载下表现出优异的抗断裂性,而扶手椅方向则表现出改善的弹性。接下来,我们表明增加空位浓度和裂纹长度会显著降低β - 铋烯的断裂应力和应变。在所有这些条件下,β - 铋烯在拉伸加载下表现出强烈的手性效应。我们还研究了预裂纹β - 铋烯的断裂现象,结果表明扶手椅方向的裂纹比锯齿方向的裂纹具有更高的抗断裂性。有趣的是,扶手椅裂纹在裂纹扩展过程中出现了分支现象;同时,锯齿裂纹垂直于加载方向扩展。之后,我们研究了加载速率对铋烯沿扶手椅和锯齿方向的断裂性能的影响。最后,我们计算了温度和空位影响下铋烯的热导率,并记录到随着温度和空位的增加,热导率大幅下降。根据声子态密度、声子色散谱和声子群速度对所得结果进行了全面讨论。还揭示了β - 铋烯的热导率远低于其他类似的蜂窝结构。这项研究可以为铋烯在未来(光)电子、自旋电子和热电设备中的成功实现增添新的维度。