Suppr超能文献

使用去细胞细胞外基质和温敏聚合物制造分化间充质干细胞的肝实质细胞片。

Hepatic cell-sheet fabrication of differentiated mesenchymal stem cells using decellularized extracellular matrix and thermoresponsive polymer.

机构信息

Drug Applied Research Center, Student Research Committee, and Department of Medical Biotechnology, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran.

PhD of Medical Biotechnology, Department of Physiology, Tabriz University of Medical Sciences, Tabriz, Iran; Department of Medical Biotechnology, Faculty of Advanced Medical Sciences, Tabriz University of Medical Sciences, Tabriz, Iran.

出版信息

Biomed Pharmacother. 2021 Feb;134:111096. doi: 10.1016/j.biopha.2020.111096. Epub 2020 Dec 15.

Abstract

PURPOSE

Liver tissue engineering via cell sheet technology would open new doors for treatment of patients with liver failure. Decellularized tissues could provide sufficient extracellular matrix (ECM) to support development of hepatocytes in in vivo niches. Besides, with the potential of temperature responsive polymer (pNIPAAm) as an intelligent surface for controlling the attachment/detachment of cell, we set out to generate three in vitro microenvironments models including I: pNIPAAm hydrogel (pN hydrogel), II: decellularized ECM incorporated into pNIPAAm hydrogel (dECM + pN hydrogel) and III: decellularized ECM scaffold (dECM scaffold) to investigate the structural and function cues of hepatocyte-like cells after differentiation of adipose tissue-derived mesenchymal stem cells (AT-MSCs) on the surface of these models.

METHOD

dECM scaffold was obtained after decellularization of rat liver, and its efficiency was analyzed. pN hydrogel and dECM + pN hydrogel (1:3 and 2:3 ratios) of were fabricated, and scaffold architecture was characterized. Each well of culturing plates was coated separately with these three constructs and AT-MSCs were instructed to differentiate into hepatocyte-like cells (HLCs). After recellularization, patterns of differentiation, and expression of hepatogenic markers were investigated via biochemical assays and qRT-PCR at different time points.

RESULTS

Multipotency of AT-MSCs, after their ability for osteogenesis and adipogenesis was documented. Production of dense and intact cell sheets was reported in dECM + pN hydrogel, as opposed to pN hydrogel and dECM scaffold. Also, statistically significant difference of HLCs functionality in dECM + pN hydrogel was confirmed after evaluation of the expression of hepatocyte markers including, alpha-fetoprotein, cytokeratin 18, cytochrome P450-2E1 and phosphoenolpyruvate carboxykinase.

CONCLUSION

Our results proved dECM + pN hydrogel were able to preserve hepatocyte function in cell sheets owing to the high level of albumin, urea, hepatogenic markers, and glycogenesis potential of HLCs. Accordingly, dECM incorporated in pN hydrogel could remodel microenvironments to guide the AT-MSCs into conducive differentiation and proliferation to give rise to multilayer sheets of cells in their own ECM.

摘要

目的

通过细胞片层技术进行肝组织工程将为肝功能衰竭患者的治疗开辟新途径。去细胞组织可以提供足够的细胞外基质 (ECM) 以支持肝细胞在体内小生境中的发育。此外,具有温敏聚合物 (pNIPAAm) 作为控制细胞附着/分离的智能表面的潜力,我们着手生成三个体外微环境模型,包括 I:pNIPAAm 水凝胶 (pN 水凝胶)、II:掺入 pNIPAAm 水凝胶中的去细胞 ECM(dECM + pN 水凝胶)和 III:去细胞 ECM 支架 (dECM 支架),以研究脂肪组织衍生的间充质干细胞 (AT-MSCs) 在这些模型表面分化后肝样细胞的结构和功能线索。

方法

通过大鼠肝脏去细胞化获得 dECM 支架,并对其效率进行分析。制备 pN 水凝胶和 dECM + pN 水凝胶 (1:3 和 2:3 比例),并对支架结构进行了表征。培养板的每个孔单独用这三种构建体包被,并指导 AT-MSCs 分化为肝样细胞 (HLC)。再细胞化后,通过生化测定和 qRT-PCR 在不同时间点研究分化模式和肝生成标志物的表达。

结果

在证明 AT-MSCs 具有多能性之后,即在其成骨和成脂能力之后。在 dECM + pN 水凝胶中报告了致密且完整的细胞片层的产生,而在 pN 水凝胶和 dECM 支架中则没有。此外,通过评估包括甲胎蛋白、细胞角蛋白 18、细胞色素 P450-2E1 和磷酸烯醇丙酮酸羧激酶在内的肝生成标志物的表达,证实了 dECM + pN 水凝胶中 HLC 功能的统计学显着差异。

结论

我们的结果证明,由于 HLC 中白蛋白、尿素、肝生成标志物和糖生成潜力的水平较高,dECM + pN 水凝胶能够在细胞片中保留肝细胞功能。因此,掺入 pN 水凝胶中的 dECM 可以重塑微环境,以指导 AT-MSCs 进行有利的分化和增殖,从而在其自身的 ECM 中产生多层细胞片。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验