Laboratory of Petrochemical Synthesis, Faculty of Hydrocarbons and Chemistry, University of M'Hamed Bougara, Boumerdes 35000, Algeria E-mail:
Laboratory of Natural Gas Chemistry, Faculty of Chemistry, University of Sciences and Technology, Houari Boumediene, Algiers 16 111, Algeria; Centre de Recherche Scientifique et Technique en Analyses Physico-chimiques (CRAPC), BP 384-Bou-Ismail-RP 42004, Tipaza, Algeria.
Water Sci Technol. 2020 Dec;82(12):2837-2846. doi: 10.2166/wst.2020.519.
This study focuses on the synthesis of various nanocomposites with heterojunction structures, MgAl-LDH (LDH = layered double hydroxides) hybrid with semiconductor such as MoO and CuO. These solids were synthesized by co-precipitation method at constant pH and have been characterized extensively using atomic absorption spectroscopy (AAS), X-ray diffraction (XRD), Fourier transform infrared (FTIR) and transmission electron microscopy-energy dispersive X-ray (TEM-EDX) methods. The catalytic activity of nanocomposites was tested in the photocatalytic degradation under solar irradiation of emerging pollutants as the pharmaceutical metronidazole (MNZ). The experimental parameters, including initial MNZ concentration, the nature of oxide incorporate in the photocatalyst, catalyst loading were explored. All the synthesized samples showed high photocatalytic performances; the highest photocatalysis efficiency was achieved with the photocatalyst dose 1.5 g/L and initial MNZ concentration of 10 mg/L at neutral pH. The photocatalytic experimental results were fitted very well to the Langmuir-Hinshelwood model. From the obtained results the calcined LDH/semiconductors could be efficient for the photocatalytic process under solar irradiation of pharmaceuticals and may contribute in environmental remediation.
本研究专注于合成具有异质结结构的各种纳米复合材料,将半导体如 MoO 和 CuO 与 MgAl-LDH(LDH=层状双氢氧化物)杂化。这些固体通过恒 pH 值的共沉淀法合成,并通过原子吸收光谱法(AAS)、X 射线衍射(XRD)、傅里叶变换红外(FTIR)和透射电子显微镜-能量色散 X 射线(TEM-EDX)方法进行了广泛的表征。纳米复合材料的催化活性在太阳能照射下对新兴污染物如药物甲硝唑(MNZ)的光催化降解中进行了测试。实验参数,包括初始 MNZ 浓度、光催化剂中氧化物的性质、催化剂负载量进行了探讨。所有合成的样品都表现出很高的光催化性能;在中性 pH 值下,当光催化剂剂量为 1.5 g/L 且初始 MNZ 浓度为 10 mg/L 时,光催化效率最高。光催化实验结果非常符合朗缪尔-欣谢尔伍德模型。从获得的结果来看,煅烧后的 LDH/半导体在太阳光照射下可能对光催化过程有效,并可能有助于环境修复。