Department of Chemistry, University of Azad Jammu and Kashmir, Muzaffarabad 13100, Pakistan.
Departments of Public Health and Environmental Engineering, California Innovations Corp., San Diego, CA 92037, USA.
Molecules. 2022 Dec 1;27(23):8420. doi: 10.3390/molecules27238420.
Nickel stannate nanocomposites could be useful for removing organic and toxic water pollutants, such as methyl orange (MO). The synthesis of a nickel oxide-tin oxide nanocomposite (NiO-SnO NC) via a facile and economically viable approach using a leaf extract from for the photocatalytic degradation of MO. The phase composition, crystallinity, and purity were examined by X-ray diffraction (XRD). The particles' morphology was studied using scanning electron microscopy (SEM). The elemental analysis and colored mapping were carried out via energy dispersive X-ray (EDX). The functional groups were identified by Fourier transform infrared spectroscopy (FTIR). UV-visible diffuse reflectance spectroscopy (UV-vis DRS) was used to study the optical properties such as the absorption edges and energy band gap, an important feature of semiconductors to determine photocatalytic applications. The photocatalytic activity of the NiO-SnO NC was evaluated by monitoring the degradation of MO in aqueous solution under irradiation with full light spectrum. The effects of calcination temperature, pH, initial MO concentration, and catalyst dose were all assessed to understand and optimize the physicochemical and photocatalytic properties of NiO-SnO NC. NiO-SnO NC was successfully synthesized via a biological route using leaf extract. XRD showed rhombohedral NiO and tetragonal SnO nanostructures and the amorphous nature of NiO-SnO NC. Its degree of crystallinity, crystallite size, and stability increased with increased calcination temperature. SEM depicted significant morphological changes with elevating calcination temperatures, which are attributed to the phase conversion from amorphous to crystalline. The elemental analysis and colored mapping show the formation of highly pure NiO-SnO NC. FTIR revealed a decrease in OH, and the ratio of oxygen vacancies at the surface of the NC can be explained by a loss of its hydrophilicity at increased temperatures. All the NC samples displayed significant absorption in the visible region, and a blue shift is seen and the energy band gap decreases when increasing the calcination temperatures due to the dehydration and formation of compacted large particles. NiO-SnO NC degrades MO, and the photocatalytic performance decreased with increasing calcination temperature due to an increase in the crystallite size of the NC. The optimal conditions for the efficient NC-mediated photocatalysis of MO are 100 °C, 20 mg catalyst, 50 ppm MO, and pH 6. The auspicious performance of the NiO-SnO NCs may open a new avenue for the development of semiconducting p-n heterojunction catalysts as promising structures for removing undesirable organic pollutants from the environment.
镍锡酸盐纳米复合材料可用于去除有机和有毒的水污染物质,如甲基橙 (MO)。本研究通过简便且经济可行的方法,利用植物叶片提取物合成了氧化镍-氧化锡纳米复合材料 (NiO-SnO NC),并将其用于 MO 的光催化降解。采用 X 射线衍射 (XRD) 对其相组成、结晶度和纯度进行了检测。通过扫描电子显微镜 (SEM) 研究了颗粒的形态。通过能谱仪 (EDX) 进行了元素分析和有色映射。采用傅里叶变换红外光谱 (FTIR) 确定了官能团。通过紫外-可见漫反射光谱 (UV-vis DRS) 研究了光学性质,如吸收边和能隙,这是半导体确定光催化应用的重要特征。通过监测在全光谱照射下水溶液中 MO 的降解,评估了 NiO-SnO NC 的光催化活性。研究了煅烧温度、pH 值、初始 MO 浓度和催化剂剂量对 NiO-SnO NC 的物理化学和光催化性能的影响,以了解并优化 NiO-SnO NC 的性能。NiO-SnO NC 通过使用植物叶片提取物的生物途径成功合成。XRD 显示出斜方晶相的 NiO 和四方晶相的 SnO 纳米结构以及 NiO-SnO NC 的非晶态性质。随着煅烧温度的升高,其结晶度、晶粒尺寸和稳定性均增加。SEM 描绘了随着煅烧温度升高而发生的显著形态变化,这归因于从非晶态到晶态的相转变。元素分析和有色映射表明形成了高度纯净的 NiO-SnO NC。FTIR 表明 OH 的减少,而 NC 表面氧空位的比例增加可以用其在较高温度下失去亲水性来解释。所有 NC 样品在可见光区域均显示出显著的吸收,并且随着煅烧温度的升高,观察到蓝移且能隙减小,这是由于脱水和形成紧密的大颗粒所致。NiO-SnO NC 降解 MO,由于 NC 晶粒尺寸的增加,光催化性能随煅烧温度的升高而降低。MO 高效 NC 介导的光催化的最佳条件为 100°C、20 mg 催化剂、50 ppm MO 和 pH 6。NiO-SnO NC 的良好性能可能为开发半导体 p-n 异质结催化剂开辟新途径,作为从环境中去除不良有机污染物的有前途的结构。