Value and limitations of Doppler echocardiography in the quantification of stenotic mitral valve area: comparison of the pressure half-time and the continuity equation methods.

Two Doppler methods, the pressure half-time method proposed by Hatle and the method based on the equation of continuity, were used to estimate stenotic mitral valve area noninvasively, and the accuracy of these methods was examined in patients with and without associated aortic regurgitation. Mitral valve area determined at catheterization by the Gorlin formula was used as a standard of reference. The study population consisted of 41 patients with mitral stenosis, and 20 of the 41 patients had associated aortic regurgitation. According to the equation of continuity, mitral valve area was determined as a product of aortic or pulmonic annular cross-sectional area and the ratio of time velocity integral of aortic or pulmonic flow to that of the mitral stenotic jet. Mitral valve area was determined by the pressure half-time method as 220/pressure half-time, the time from the peak transmitral velocity to one-half the square root of the peak velocity on the continuous-wave Doppler-determined transmitral flow velocity pattern. The pressure half-time method tended to overestimate catheterization measurements, and the correlation coefficient for this relation was .69 (SEE = 0.44 cm2). The correlation coefficient improved to .90 when the patients with associated aortic regurgitation were excluded. Mitral valve areas determined by the continuity equation method correlated well with catheterization measurements at a correlation coefficient of .91 (SEE = 0.24 cm2), irrespective of the presence of aortic regurgitation. The ratio of the time-velocity integral or aortic or pulmonic flow to the time-velocity integral of mitral stenotic jet also correlated well with mitral valve area determined by catheterization at a correlation coefficient of .84 (SEE = 0.10).(ABSTRACT TRUNCATED AT 250 WORDS)