Dipartimento di Chimica & CSGI, Università di Firenze, 50019 Sesto Fiorentino, Italy; División de Ciencias e Ingenierías, Universidad de Guanajuato, 37150 León, Mexico.
Centro de Graduados e Investigación en Química del Tecnológico Nacional de México/Instituto Tecnológico de Tijuana, 22500 Tijuana, Mexico.
J Colloid Interface Sci. 2021 Apr;587:437-445. doi: 10.1016/j.jcis.2020.11.101. Epub 2020 Nov 28.
Soft microgel colloids can be densely packed since particle networks can compress and interpenetrate. This evolution of the particle's internal structure associated with packing is expected to determine the linear viscoelastic properties and the yielding behavior of dense suspensions of microgel colloids.
We investigated the volume fraction-dependent linear and non-linear rheological response of suspensions of soft core-shell particles formed by a poly(N-isopropylacrylamide) (PNIPAM) microgel core and a thin poly(ethylene glycol) (PEG) shell.
The linear viscoelasticity of suspensions reveals a transition from a fluid to a jammed glass state. Increasing volume fraction within the jammed state, the linear storage modulus and the yield stress show distinct regimes associated with the evolution of particle contacts, which involve progressive compression and interpenetration of the shell and core. The yielding of jammed suspensions occurs in two-steps: At small strains jammed cages are rearranged, while full disentanglement of interpenetrating networks only occurs at large deformations and results in fluidization. Yield strains and stresses increase with increasing shear rate or frequency, suggesting a progressive dominance of the timescale associated with shear over that associated with the internal dynamics of the system.
软质微凝胶胶体可以紧密堆积,因为颗粒网络可以压缩和相互贯穿。这种与堆积相关的颗粒内部结构的演变预计将决定微凝胶胶体密集悬浮液的线性黏弹性性质和屈服行为。
我们研究了由聚(N-异丙基丙烯酰胺)(PNIPAM)微凝胶核和薄的聚(乙二醇)(PEG)壳组成的软核壳粒子悬浮液的体积分数依赖性线性和非线性流变响应。
悬浮液的线性黏弹性表现出从流体到被堵塞的玻璃态的转变。在被堵塞的状态下,随着体积分数的增加,线性储能模量和屈服应力表现出与颗粒接触演变相关的明显区域,这涉及到壳和核的渐进压缩和相互贯穿。被堵塞的悬浮液的屈服发生在两个步骤中:在小应变下,被堵塞的笼子发生重排,而只有在大变形时,相互贯穿的网络才会完全解缠,并导致流化。屈服应变和应力随着剪切率或频率的增加而增加,这表明与系统内部动力学相关的时间尺度逐渐主导剪切相关的时间尺度。