Department of Civil, Construction and Environmental Engineering, Marquette University, Milwaukee, WI, USA.
Water Environ Res. 2021 Aug;93(8):1179-1193. doi: 10.1002/wer.1506. Epub 2021 Jan 23.
Sewers can become hydraulically overburdened during high-intensity precipitation resulting in untreated water entering receiving streams. Combined (CSOs) and sanitary sewer overflows (SSOs) cause adverse public health and environmental impacts as well as management challenges for many wastewater utilities. This novel review presents information regarding wet weather flow regulation, impacts, and current management methods, and offers ideas for future approaches in the United States. Currently, storage followed by conventional municipal water reclamation facility treatment after precipitation events is often employed. Stand-alone alternative technologies include high-rate solids removal, rapid disinfection, filtration, and green infrastructure. However, most current stand-alone approaches do not address soluble BOD or emerging contaminants in stormwater and wastewater. As the needs for wet weather flow management change, future approaches should include a goal of zero overflows and achieve effluent quality as good as or better than conventional treatment. To help achieve zero overflows and complete treatment, the "peaker facility" concept is proposed. The peaker facility often remains idle but treats excess flow when needed. Considering the challenges of remaining idle for long periods, starting up quickly, and handling high flows, chemical oxidation may be an applicable peaker facility component. However, more research and development are needed to determine best practices. PRACTITIONER POINTS: Combined (CSO) and sanitary sewer overflows (SSOs) pose both environmental and public health risks as untreated water is discharged into lakes and rivers during high-intensity rain events. Current stand-alone approaches for managing or treating CSOs focus on particulate BOD/COD and solids removal, and do not typically address soluble BOD or emerging contaminants in stormwater and wastewater (including pathogens). New wet weather policies and regulations encourage more holistic approaches by wastewater utilities, and future approaches should include a zero-overflow goal for all CSOs and SSOs. To help achieve zero overflows, the concept of the "peaker facility" is proposed. Chemical oxidation may be an applicable component of peaker facilities for its short detention time and ability to remove, oxidize, or inactive water impairment-causing contaminants.
下水道在高强度降水期间可能会承受水力压力,导致未经处理的水进入接收溪流。合流(CSO)和污水下水道溢流(SSO)会对公共健康和环境造成不利影响,同时也给许多废水处理厂带来管理挑战。本新型综述介绍了有关雨水流量调节、影响和当前管理方法的信息,并为美国未来的方法提供了思路。目前,通常采用在降水事件后进行存储,然后采用传统的市政水回收设施进行处理。独立的替代技术包括高速固体去除、快速消毒、过滤和绿色基础设施。然而,大多数当前的独立方法都无法解决雨水和废水中的可溶性 BOD 或新兴污染物。随着对雨水管理的需求变化,未来的方法应包括零溢流的目标,并实现与传统处理一样好或更好的出水质量。为了帮助实现零溢流和完全处理,提出了“峰值设施”的概念。峰值设施通常处于闲置状态,但在需要时处理多余的流量。考虑到长期闲置、快速启动和处理高流量的挑战,化学氧化可能是一种适用的峰值设施组件。然而,需要进一步的研究和开发来确定最佳实践。从业者要点:合流(CSO)和污水下水道溢流(SSO)在高强度降雨事件中排放未经处理的水到湖泊和河流时,会带来环境和公共健康风险。目前,用于管理或处理 CSO 的独立方法侧重于颗粒 BOD/COD 和固体去除,通常不处理雨水和废水中的可溶性 BOD 或新兴污染物(包括病原体)。新的雨水政策和法规鼓励废水处理厂采取更全面的方法,未来的方法应包括所有 CSO 和 SSO 的零溢流目标。为了帮助实现零溢流,提出了“峰值设施”的概念。由于其短停留时间和去除、氧化或使造成水质损害的污染物失活的能力,化学氧化可能是峰值设施的一个适用组件。