Suppr超能文献

三维涂层 SF/PLGA 同轴纳米纤维膜在磷酸钙水泥表面,增强骨再生。

Three-Dimensional Coating of SF/PLGA Coaxial Nanofiber Membranes on Surfaces of Calcium Phosphate Cement for Enhanced Bone Regeneration.

机构信息

Norman Bethune First Hospital, Jilin University, Changchun 130021, P. R. China.

Alan G. MacDiarmid Laboratory, College of Chemistry, Jilin University, Changchun 130012, P. R. China.

出版信息

ACS Biomater Sci Eng. 2020 May 11;6(5):2970-2984. doi: 10.1021/acsbiomaterials.9b01729. Epub 2020 Apr 10.

Abstract

Calcium phosphate cements (CPCs) have been widely used for the study of bone regeneration because of their excellent physical and chemical properties, but poor biocompatibility and lack of osteoinductivity limit potential clinical applications. To overcome these limitations, and based on our previous research, CPC scaffolds were prepared with CPC as the principal material and polyethylene glycol (PEG) as a porogen to introduce interconnected macropores. Using a bespoke electrospinning auxiliary receiver, silk fibroin (SF)/poly(lactide--glycolide) (PLGA) coaxial nanofibers containing dexamethasone (DXM) and recombinant human bone morphogenetic protein-2 (rhBMP2) were fabricated which were coated on the surface of the CPC. By comparing the surface morphology by SEM, hydrophilicity, results of FTIR spectroscopy, and mechanical properties of the composite materials fabricated using different electrospinning times (20, 40, 60 min), the CPC surface constructed by electrospinning for 40 min was found to exhibit the most appropriate physical and chemical properties. Therefore, composite materials were built for further study by electrospinning for 40 min. The osteogenic capacity of the SF/PLGA/CPC, SF-DXM/PLGA/CPC, and SF-DXM/PLGA-rhBMP2/CPC scaffolds was evaluated by in vitro cell culture with rat bone marrow mesenchymal stem cells (BMSCs) and using a rat cranial defect repair model. ALP activity, calcium deposition levels, upregulation of osteogenic genes, and bone regeneration in skull defects in rats with SF-DXM/PLGA-rhBMP2/CPC implants were significantly higher than in rats implanted with the other scaffolds. These results suggest that drug-loaded coaxial nanofiber coatings prepared on a CPC surface can continuously and effectively release bioactive drugs and further stimulate osteogenesis. Therefore, the SF-DXM/PLGA-rhBMP2/CPC scaffolds prepared in this study demonstrated the most significant potential for the treatment of bone defects.

摘要

磷酸钙骨水泥 (CPC) 因其具有优异的物理化学性能而被广泛应用于骨再生研究,但较差的生物相容性和缺乏成骨诱导性限制了其潜在的临床应用。为了克服这些限制,并基于我们之前的研究,以 CPC 为主要材料,以聚乙二醇(PEG)为致孔剂,制备了 CPC 支架,以引入相互连通的大孔。使用定制的静电纺丝辅助接收器,制备了载有地塞米松(DXM)和重组人骨形态发生蛋白-2(rhBMP2)的丝素蛋白(SF)/聚(乳酸-共-乙醇酸)(PLGA)同轴纳米纤维,并将其涂覆在 CPC 表面。通过比较 SEM 观察到的表面形貌、亲水性、FTIR 光谱分析结果以及不同静电纺丝时间(20、40、60 min)制备的复合材料的机械性能,发现经 40 min 静电纺丝构建的 CPC 表面具有最合适的物理和化学性质。因此,通过 40 min 的静电纺丝构建了复合材料进行进一步研究。通过体外细胞培养大鼠骨髓间充质干细胞(BMSCs)和大鼠颅缺损修复模型,评估了 SF/PLGA/CPC、SF-DXM/PLGA/CPC 和 SF-DXM/PLGA-rhBMP2/CPC 支架的成骨能力。ALP 活性、钙沉积水平、成骨基因的上调以及植入 SF-DXM/PLGA-rhBMP2/CPC 支架的大鼠颅骨缺损中的骨再生均明显高于其他支架。这些结果表明,载药同轴纳米纤维涂层可在 CPC 表面制备,可持续有效地释放生物活性药物,进一步刺激成骨。因此,本研究制备的 SF-DXM/PLGA-rhBMP2/CPC 支架在治疗骨缺损方面具有最大的潜力。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验