Ricci Annalisa, Alinovi Marcello, Martelli Francesco, Bernini Valentina, Garofalo Alessandro, Perna Giampiero, Neviani Erasmo, Mucchetti Germano
Department of Food and Drug, University of Parma, Parma, Italy.
Research and Development, Consorzio Tutela Mozzarella di Bufala Campana DOP, Caserta, Italy.
Front Microbiol. 2021 Jan 6;11:581934. doi: 10.3389/fmicb.2020.581934. eCollection 2020.
The presence of in Mozzarella di Bufala Campana Protected Designation of Origin cheeses may depend on curd stretching conditions and post contaminations before packaging. To avoid cross-contamination, thermal treatment of water, brines and covering liquid may become necessary. The present study aimed to improve knowledge about thermal resistance focusing on the influence of some cheese making operations, namely curd stretching and heat treatment of fluids in contact with cheese after molding, in order to improve the safety of the cheese, optimize efficacy and sustainability of the processes. Moreover, the role that cheese curd stretching plays in inactivation was discussed. The 12 tested strains showed a very heterogeneous heat resistance that ranged from 7 to less than 1 Log Cfu/mL reduction after 8 min at 60°C. -values (decimal reduction times) and -values (thermal resistance constant) calculated for the most heat resistant strain among 60 and 70°C were highly affected by the matrix and, in particular, heat resistance noticeably increased in drained cheese curd. As cheese curd stretching is not an isothermal process, to simulate the overall lethal effect of an industrial process a secondary model was built. The lethal effect of the process was estimated around 4 Log reductions. The data provided may be useful for fresh pasta filata cheese producers in determining appropriate processing durations and temperatures for producing safe cheeses.
坎帕纳水牛城马苏里拉原产地保护认证奶酪中[具体物质]的存在可能取决于凝乳拉伸条件以及包装前的后期污染情况。为避免交叉污染,对水、盐水和覆盖液进行热处理可能是必要的。本研究旨在通过关注一些奶酪制作操作的影响来增进对[具体物质]热抗性的了解,这些操作包括凝乳拉伸以及成型后与奶酪接触的液体的热处理,以提高奶酪的安全性,优化工艺的有效性和可持续性。此外,还讨论了奶酪凝乳拉伸在[具体物质]失活中所起的作用。12株受试菌株表现出非常不均一的热抗性,在60°C下8分钟后,其热抗性范围为7至小于1 Log CFU/mL的减少量。针对60°C和70°C下最耐热的菌株计算出的D值(十进制减少时间)和z值(热抗性常数)受基质的影响很大,特别是在沥干的奶酪凝乳中,热抗性显著增加。由于奶酪凝乳拉伸不是等温过程,为模拟工业过程的总体致死效应,构建了一个二级模型。该过程的致死效应估计约为4 Log减少量。所提供的数据可能有助于新鲜丝状意大利面奶酪生产商确定生产安全奶酪的合适加工时间和温度。