Surkatti Riham, Al Disi Zulfa A, El-Naas Muftah H, Zouari Nabil, Van Loosdrecht Mark C M, Onwusogh Udeogu
Gas Processing Center, Qatar University, Doha, Qatar.
Department of Biotechnology, Delft University of Technology, Delft, Netherlands.
Front Bioeng Biotechnol. 2021 Jan 15;8:603305. doi: 10.3389/fbioe.2020.603305. eCollection 2020.
The gas-to-liquid (GTL) process generates considerable amounts of wastewater that are highly acidic and characterized by its high chemical oxygen demand (COD) content, due to the presence of several organic pollutants, such as alcohols, ketones, aldehydes, and fatty acids. The presence of these organics in the process water may lead to adverse effect on the environment and aquatic life. Thus, it is necessary to reduce the COD content of GTL process water to an acceptable limit before discharging or reusing the treated water. Due to several advantages, biological treatment is often utilized as the main step in GTL process water treatment plants. In order to have a successful biotreatment process, it is required to choose effective and suitable bacterial strains that have the ability to degrade the organic pollutants in GTL process water. In this work, bacterial strains were isolated from the GTL process water, identified by 16S rRNA gene sequencing and then used in the biodegradation process. The detailed identification of the strains confirmed the presence of three organics-degrading bacteria identified as sp., and sp. Furthermore, biodegradation experiments were carried out and confirmed that the pure culture as well as the mixed culture consortium of the bacterial strains has the ability to reduce the organic pollutants in GTL process water. However, the growth rate and biodegradation efficiency depend on the type of strains and the initial COD content. Indeed, the removal percentage and growth rate were enhanced after 7 days for all cultures and resulted in COD reduction up to 60%. Moreover, the mixed culture of bacterial strains can tolerate and treat GTL process water with a variety of ranges of COD contents.
气制液(GTL)工艺会产生大量高酸性废水,其化学需氧量(COD)含量很高,这是由于存在多种有机污染物,如醇类、酮类、醛类和脂肪酸。工艺用水中这些有机物的存在可能会对环境和水生生物产生不利影响。因此,在排放或回用处理后的水之前,有必要将GTL工艺用水的COD含量降低到可接受的限度。由于具有多种优势,生物处理通常被用作GTL工艺水处理厂的主要步骤。为了实现成功的生物处理过程,需要选择能够降解GTL工艺用水中有机污染物的有效且合适的细菌菌株。在这项工作中,从GTL工艺用水中分离出细菌菌株,通过16S rRNA基因测序进行鉴定,然后用于生物降解过程。对菌株的详细鉴定证实存在三种有机污染物降解细菌,分别鉴定为 sp.、 sp.。此外,进行了生物降解实验,证实细菌菌株的纯培养物以及混合培养菌群都有能力降低GTL工艺用水中的有机污染物。然而,生长速率和生物降解效率取决于菌株类型和初始COD含量。事实上,所有培养物在7天后去除率和生长速率都有所提高,COD降低高达60%。此外,细菌菌株的混合培养物能够耐受和处理各种COD含量范围的GTL工艺用水。