Sch. of Mining and Metallurgical Eng., National Technical University of Athens, 15780, Greece.
Chemosphere. 2021 Jun;273:129737. doi: 10.1016/j.chemosphere.2021.129737. Epub 2021 Jan 22.
Cr(VI) is widely used in industry and often large quantities have been accidently or due to lack of precautions released at the environment. The presence of high concentrations of Cr(VI) in waste streams causes concern due to its toxicity and solubility. However the Cr(III) is a useful micronutrient in human diet. The reduction of Cr(VI) to Cr(III) is a promising technology for a clean environment. Polyphenols are commonly found in plants and they are considered as strong natural antioxidants. In this study the reduction of hexavalent to trivalent chromium using gallic acid (GA), a polyhydroxyphenolic compound, was evaluated. The effect of pH, temperature, and Cr(VI) concentration on the kinetics of Cr(VI) reduction by GA were examined by conducting batch tests. It was found that reduction of Cr(VI) by GA is a rapid reaction under mild acidic conditions. Reduction was found to follow a 2nd order kinetics with respect to Cr(VI) concentration in the pH range 3-5. The results of the present study indicated that the treatment of contaminated waters with initial concentration of Cr(VI) 100 μΜ by gallic acid, below the environmental limit of 0.96 μM, required 20 min at pH 3 and 40 min at pH 4. At higher pH a different reduction mechanism seems to prevail and the required time for Cr(VI) reduction was approximately 10 h at pH 5 and 42 h at pH 6. The increase of temperature25 °C to 35 °C, at pH 6, was slightly accelerated the reaction.
六价铬广泛应用于工业生产中,由于意外事故或缺乏防护措施,大量六价铬会释放到环境中。废水中高浓度的六价铬因其毒性和溶解度而引起关注。然而,三价铬是人类饮食中有用的微量元素。将六价铬还原为三价铬是一种清洁环境的有前途的技术。多酚广泛存在于植物中,被认为是一种很强的天然抗氧化剂。在这项研究中,使用没食子酸(GA),一种多羟基酚类化合物,评估了将六价铬还原为三价铬的效果。通过进行批量测试,考察了 pH 值、温度和 Cr(VI)浓度对 GA 还原 Cr(VI)动力学的影响。结果表明,在温和的酸性条件下,GA 还原 Cr(VI)是一个快速反应。还原反应符合二级动力学,Cr(VI)浓度在 pH 值为 3-5 的范围内。本研究的结果表明,用没食子酸处理初始 Cr(VI)浓度为 100 μΜ 的污染水,在环境限值 0.96 μM 以下,在 pH 3 下需要 20 分钟,在 pH 4 下需要 40 分钟。在较高的 pH 值下,似乎存在不同的还原机制,在 pH 5 下还原 Cr(VI)所需的时间约为 10 小时,在 pH 6 下约为 42 小时。在 pH 6 下,温度从 25°C 升高到 35°C 略微加速了反应。