Song Jayeon, Kim Hyo Yong, Kim Soohyun, Jung Yujin, Park Hyun Gyu
Department of Chemical and Biomolecular Engineering (BK 21+ Program), KAIST, Daehak-ro 291, Yuseong-gu, Daejeon, 34141, Republic of Korea.
Department of Chemical and Biomolecular Engineering (BK 21+ Program), KAIST, Daehak-ro 291, Yuseong-gu, Daejeon, 34141, Republic of Korea.
Biosens Bioelectron. 2021 Apr 15;178:113051. doi: 10.1016/j.bios.2021.113051. Epub 2021 Jan 30.
We herein describe a novel technology, termed self-priming phosphorothioated hairpin-mediated isothermal amplification (SP-HAMP), enabling target nucleic acid detection. Isothermal amplification strategies are a simple process that efficiently raises the amount of nucleic acid at a constant temperature, but still has lots of problems such as the requirement of multiple exogenous primers and enzymes, which trigger non-specific background signal and increase the complexity of procedures. The key component for overcoming the above-mentioned limitations is the designed hairpin probe (HP) consisting of self-priming region along the 3' stem and the 3' overhang and phosphorothioate modifications at the 5' overhang and the specific loop part. The HP was designed to open through binding to target nucleic acid. Upon opening of HP, its self-priming (SP) region is rearranged to form a smaller hairpin whose 3' end could serve as a primer. The following extension produces the extended HP and displaces the bound target nucleic acid, which is then recycled to open another HP. Due to the reduced stability caused by the specific two phosphorothioate (PS) modifications, the 3' end of EP1 is readily rearranged to form the foldback hairpin structure, which would promote the foldback extension to produce once more extended HP. Since the two PS modifications are always located at the same positions along the 5' stem within the further extended HPs, the foldback reaction followed by the extension would be continuously repeated, consequently producing a large number of the long hairpin concatamers. Based on this unique design principle, we successfully detected even a single copy of target DNA with outstanding discrimination capability under an isothermal condition by employing only a single HP without the requirement for the complicated multiple primers. In conclusion, the sophisticated design principle employed in this work would provide great insight for the development of self-operative isothermal amplifying system enabling short target nucleic acid detection such as microRNAs or any target which is less than 200 mer.
我们在此描述了一种名为自引发硫代磷酸化发夹介导的等温扩增(SP-HAMP)的新技术,可实现靶核酸检测。等温扩增策略是一个简单的过程,能在恒定温度下有效增加核酸量,但仍存在诸多问题,如需要多种外源引物和酶,这会引发非特异性背景信号并增加操作复杂性。克服上述局限性的关键组件是设计的发夹探针(HP),它由沿3'茎的自引发区域、3'突出端以及5'突出端和特定环部分的硫代磷酸化修饰组成。HP被设计为通过与靶核酸结合而打开。HP打开后,其自引发(SP)区域重新排列形成一个较小的发夹,其3'端可作为引物。随后的延伸产生延伸的HP并置换结合的靶核酸,然后靶核酸循环以打开另一个HP。由于特定的两个硫代磷酸酯(PS)修饰导致稳定性降低,EP1的3'端很容易重新排列形成回折发夹结构,这将促进回折延伸以再次产生延伸的HP。由于这两个PS修饰始终位于进一步延伸的HP内5'茎的相同位置,延伸后的回折反应将持续重复,从而产生大量长发夹串联体。基于这一独特的设计原理,我们仅使用单个HP,在等温条件下成功检测到单拷贝的靶DNA,具有出色的区分能力,无需复杂的多种引物。总之,这项工作中采用的精巧设计原理将为开发能够检测短靶核酸(如微小RNA或任何小于200个碱基的靶标)的自操作等温扩增系统提供深刻见解。