Dawelbeit Ahmed, Yu Muhuo
State Key Laboratory for Modification of Chemical Fibres and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201620, People's Republic of China.
ACS Omega. 2021 Jan 27;6(5):3535-3547. doi: 10.1021/acsomega.0c04740. eCollection 2021 Feb 9.
A reversible confinement of ionic liquid (IL) among the amide segments has been carried out for the preparation of high-modulus and high-strength aliphatic semicrystalline nylon 6 fibers. In this research work, the suppression or the weakening of the hydrogen bonds during the conventional low-speed melt spinning process is followed by a hot-drawing stage and a subsequent IL extraction of the IL out of the 2% wt IL-confined fibers and an immediate thermal stabilization process for the improvement of the properties of the pristine nylon 6 fibers. The resulted crystal structural developments of the IL-confined fibers are attributed to ultimate molecular orientations, which have contributed to the developments of the overall fiber properties. Here, the influences of the IL on the γ and the α crystal phases, the γ-α transition, the morphological properties, and the tensile properties are investigated. The FTIR reported, experimentally, additional peaks at 1237 cm for the γ crystal phase and at 1417 and 1476 cm for the α crystal phase, in conformity with the theoretical computations. The XRD demonstrated that the conventional low-speed melt spinning can successfully be used to prepare as-spun IL-confined fibers having highly improved properties. The so prepared as-spun IL-confined fibers are found to have a γ phase structure that has a small crystal size and high crystal perfections. Fortunately, the γ-to-α crystal phase transition for the IL-confined nylon 6 fibers can be acquired during the hot-drawing stage (stress-induced phase transformation). Furthermore, the IL extraction process followed by a thermal stabilization process, interestingly, has led to significant increases in both of the tensile strengths and the tensile moduli of the reverted nylon 6 fibers. The values that are found are 8.46 cN/dtex for the tensile strength and 39.09 cN/dtex for the tensile modulus. The structure-property relationships between the IL-confined and the reverted nylon 6 fibers have also been discussed.
为制备高模量和高强度的脂肪族半结晶尼龙6纤维,已实现离子液体(IL)在酰胺链段间的可逆受限。在本研究工作中,传统低速熔体纺丝过程中氢键的抑制或减弱之后是热拉伸阶段,随后从2%重量比的IL受限纤维中萃取IL,并立即进行热稳定化处理,以改善原始尼龙6纤维的性能。IL受限纤维最终的晶体结构发展归因于最终的分子取向,这有助于整体纤维性能的发展。在此,研究了IL对γ和α晶相、γ-α转变、形态性能和拉伸性能的影响。实验报道的FTIR显示,γ晶相在1237 cm处有额外峰,α晶相在1417和1476 cm处有额外峰,与理论计算结果一致。XRD表明,传统低速熔体纺丝可成功用于制备性能大幅改善的初生IL受限纤维。发现如此制备的初生IL受限纤维具有γ相结构,晶体尺寸小且晶体完整性高。幸运的是,IL受限尼龙6纤维在热拉伸阶段(应力诱导相变)可实现γ到α晶相的转变。此外,有趣的是,IL萃取过程之后进行热稳定化处理,使回复后的尼龙6纤维的拉伸强度和拉伸模量均显著提高。测得的拉伸强度值为8.46 cN/dtex,拉伸模量值为39.09 cN/dtex。还讨论了IL受限和回复后的尼龙6纤维之间的结构-性能关系。