Geng Linlin, Zhang Weixuan, Zhang Xiangdong, Zhou Xiaoming
Key Laboratory of Dynamics and Control of Flight Vehicle of Ministry of Education, School of Aerospace Engineering, and.
Key Laboratory of Advanced Optoelectronic Quantum Architecture and Measurements of Ministry of Education, School of Physics, Beijing Institute of Technology, Beijing 100081, People's Republic of China.
Proc Math Phys Eng Sci. 2021 Jan;477(2245):20200766. doi: 10.1098/rspa.2020.0766. Epub 2021 Jan 27.
Exceptional points are special degeneracies occurring in non-Hermitian systems at which both eigenfrequencies and eigenmodes coalesce simultaneously. Fascinating phenomena, including topological, non-reciprocal and chiral energy transfer between normal modes, have been envisioned in optical and photonic systems with the exceptional point dynamically encircled in the parameter space. However, it has remained an open question of whether and how topological mode switching relying on exceptional points could be achieved in mechanical systems. The present paper studies a two-mode mechanical system with an exceptional point and implements the dynamic encircling of such a point using dynamic modulation mechanisms with time-driven elasticity and viscosity. Topological mode switching with robustness against the input state and loop trajectories has been demonstrated numerically. It is found that the dynamical encircling of an exceptional point with the starting point near the symmetric phase leads to chiral mode transfer controlled mainly by the encircling direction, while non-chiral dynamics is observed for the starting point near the broken phase. Analyses also show that minor energy input is required in the process of encircling the exceptional point, demonstrating the intrinsically motivated behaviour of topological mode switching.
例外点是在非厄米系统中出现的特殊简并点,在这些点上本征频率和本征模式会同时合并。在光学和光子系统中,人们设想了一些引人入胜的现象,包括正常模式之间的拓扑、非互易和手性能量转移,其中例外点在参数空间中动态环绕。然而,在机械系统中是否以及如何实现依赖例外点的拓扑模式切换仍然是一个悬而未决的问题。本文研究了一个具有例外点的双模式机械系统,并使用具有时间驱动弹性和粘性的动态调制机制实现了该点的动态环绕。通过数值模拟证明了拓扑模式切换对输入状态和环路轨迹具有鲁棒性。研究发现,例外点的动态环绕且起点靠近对称相时会导致主要由环绕方向控制的手性模式转移,而起点靠近破缺相时则观察到非手性动力学。分析还表明,在环绕例外点的过程中只需要少量能量输入,这证明了拓扑模式切换具有内在驱动行为。