Wang Jing-Xian, Hayashi Jun-Ichiro, Asano Shusaku, Kudo Shinji
Interdisciplinary Graduate School of Engineering Sciences, Kyushu University, Kasuga, Fukuoka 816-8580, Japan.
Institute for Materials Chemistry and Engineering, Kyushu University, Kasuga, Fukuoka 816-8580, Japan.
ACS Omega. 2021 Feb 4;6(6):4236-4246. doi: 10.1021/acsomega.0c05154. eCollection 2021 Feb 16.
The present study investigated oxidation of pulverized Japanese cedar with O in hot-compressed alkaline water, employing a newly developed flow-through fixed-bed reactor (percolator). It allowed us to determine the rate of the primary extraction that was free from the secondary reactions of extract in the aqueous phase and those over the residual solid, solubility of extractable matter, and mass transport processes. Quantitative kinetic analysis revealed that the cedar consisted of three kinetic components (C1-C3) that underwent extraction in parallel following first-order kinetics with different rate constants. Further analysis revealed the chemical compositions of the kinetic components, which were mixtures of carbohydrates and lignin. C1 was converted most rapidly by nonoxidative reactions such as alkali-catalyzed hydrolysis, while C2 was converted by oxidative degradation. The product distributions from C1 and C2 (CO, lower organic acids, oligosaccharides, acid-soluble, and acid-insoluble lignins) were steady throughout their conversion. Both C1 and C2 thus behaved as single reactants; nevertheless, those were lignin/carbohydrates mixtures. It was also demonstrated that the extraction rate of C2 was proportional to the concentration of dissolved O. C3 was the most refractory component, consisting mainly of glucan and very minimally of the lignin, xylan, mannan, galactan, and arabinan.
本研究采用新开发的流通固定床反应器(渗滤器),研究了粉化日本雪松在热压缩碱性水中与氧气的氧化反应。这使我们能够确定在水相中提取物不发生二次反应以及在残余固体上不发生二次反应的一次提取速率、可提取物的溶解度和传质过程。定量动力学分析表明,雪松由三个动力学组分(C1 - C3)组成,它们以不同的速率常数遵循一级动力学并行进行提取。进一步分析揭示了动力学组分的化学组成,它们是碳水化合物和木质素的混合物。C1通过碱催化水解等非氧化反应转化最快,而C2通过氧化降解转化。C1和C2的产物分布(CO、低级有机酸、低聚糖、酸溶性和酸不溶性木质素)在整个转化过程中保持稳定。因此,C1和C2都表现为单一反应物;然而,它们是木质素/碳水化合物混合物。还证明了C2的提取速率与溶解氧的浓度成正比。C3是最难处理的组分,主要由葡聚糖组成,木质素、木聚糖、甘露聚糖、半乳聚糖和阿拉伯聚糖含量极少。