State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing, Jiangsu 210093, People's Republic of China.
State Key Laboratory of Pollution Control and Resource Reuse, School of the Environment, Nanjing University, Nanjing, Jiangsu 210093, People's Republic of China; College of Natural Resources and Environment, Northwest A&F University, Yangling, Shaanxi, 712100, People's Republic of China.
Water Res. 2021 May 1;195:116980. doi: 10.1016/j.watres.2021.116980. Epub 2021 Feb 26.
Bisphenol A polycarbonate (BPA-PC) is a kind of widely used engineering plastics. However, excessive usage causes the production of plastic wastes, following property changes of polymers and high risks of released chemicals during outdoor weathering. In this study, we systematically investigated the photoaging behavior of PC microplastics (MPs) in aquatic environment and evaluated the potential risk of released intermediates. Light irradiation along with mechanical abrasion facilitated the fragmentation of PC MPs and stimulated photooxidative modification during 640 h of ultraviolet (UV) exposure. Continuous degradation of the polymer was accompanied with dramatic decline of molecular weight. Also, BPA was released from irradiated PC MPs with a trend of an initial rapid increase followed by a decrease versus the irradiation time, and the maximum concentration of dropped BPA was detected up to 652.80 ± 72.89 μg/g (43.39% and 56.61% respectively in particles and leachates). However, the releasing amount of BPA in the leachate merely occupied 2.7% of the total organic carbon (TOC) leached out, suggesting that a great number of unknown organic products were produced other than BPA. Liquid chromatography-time-of-flight-mass spectrometry (LC-TOF-MS) analysis showed that these organic compounds forming MPs-derived dissolved organic matter (MPs DOM) were partly composed of 4,4'-dihydroxybenzophenone (DHB), p-hydroxybenzoic acid (p-HBA) and methyparaben (MeP), which would also contribute to the estrogenic activity. The degradation pathway of PC MPs was elaborated with the photolysis process of PC dimer and BPA, and the remarkable photoaging of PC MPs was mainly dominated by the generated reactive oxygen species (ROS). The findings of this study indicated that understanding the photoaging process of PC MPs was vital to evaluate their integral cumulative estrogenic activity in aquatic environment, and further highlighted the notable possible risks of plastic leachates to exposed biota.
双酚 A 聚碳酸酯(BPA-PC)是一种广泛使用的工程塑料。然而,过量使用会导致塑料废物的产生,聚合物的性能发生变化,以及在户外风化过程中释放化学物质的风险很高。在这项研究中,我们系统地研究了 PC 微塑料(MPs)在水生环境中的光老化行为,并评估了释放中间体的潜在风险。光照和机械磨损促进了 PC MPs 的碎片化,并在 640 小时的紫外线(UV)暴露下刺激了光氧化修饰。聚合物的连续降解伴随着分子量的急剧下降。此外,从辐照后的 PC MPs 中释放出 BPA,呈现出先快速增加后减少的趋势,最大浓度达到 652.80±72.89μg/g(分别占颗粒和浸出液的 43.39%和 56.61%)。然而,浸出液中 BPA 的释放量仅占总有机碳(TOC)浸出量的 2.7%,这表明除 BPA 外,还产生了大量未知的有机产物。液相色谱-飞行时间质谱(LC-TOF-MS)分析表明,这些形成 MPs 衍生溶解有机物(MPs DOM)的有机化合物部分由 4,4'-二羟基二苯甲酮(DHB)、对羟基苯甲酸(p-HBA)和甲基对苯二甲酸(MeP)组成,这也会导致雌激素活性。阐述了 PC MPs 的降解途径,包括 PC 二聚体和 BPA 的光解过程,PC MPs 的显著光老化主要由生成的活性氧物质(ROS)主导。本研究的结果表明,了解 PC MPs 的光老化过程对于评估其在水生环境中的整体累积雌激素活性至关重要,并进一步突出了塑料浸出物对暴露生物的显著潜在风险。