Department of Plastic and Reconstructive Surgery, College of Medicine, The Catholic University of Korea, Seoul, Republic of Korea.
J Craniofac Surg. 2021;32(2):719-722. doi: 10.1097/SCS.0000000000006956.
Lower eyelid avulsion injury with lower canalicular laceration generally occur just medial to the punctum with insufficient skin remnant for repair causing tension on repair margins. The inevitable blinking force, along with the tension widens the repair margin, resulting in an aesthetically challenging notch at the medial lower lid. The authors attempted to minimize this notching deformity with a traction applying technique on bicanalicular silicone tube.Fifteen patients were enrolled and divided into 2 groups: the experimental group with 10 patients which received the traction technique, and the control group with 5 patients which the traction technique was omitted. Each end of the bicanalicular silicone tube was intubated through both puncta and the lacerated canaliculus. No canalicular anastomosis was performed. The tube ends were retrieved through the nostril, followed by medial canthal tendon, orbicularis oculi muscle, and skin repair. The tube ends were pulled to create a tension on the loop, until upper and lower puncta apposed each other, creating a dimple in the medial canthal area. The tube ends were tied and anchored at internal valve of the nostril to maintain the traction tension. Medial lower lid notching (>2 mm width), epiphora, and conjunctival injection were evaluated and compared in the 2 groups.Patients with traction technique showed symmetric medial canthal angle and minimized lower lid notching deformity when compared with the control group (P = 0.025). No conjunctival injections and epiphora were observed in either group. Symmetric and aesthetically satisfactory results were achieved by traction applying technique on bicanalicular silicone tube.
下眼睑撕裂伤伴下泪小管撕裂通常发生在泪点内侧,由于残留的皮肤不足,导致修复边缘紧张。不可避免的眨眼力加上张力会使修复边缘变宽,导致下眼睑内侧出现美学上具有挑战性的凹陷。作者试图通过双泪道硅胶管的牵引技术来最小化这种凹陷畸形。
共纳入 15 例患者,分为两组:实验组 10 例,采用牵引技术;对照组 5 例,未采用牵引技术。双泪道硅胶管的两端分别通过两个泪小点和撕裂的泪小管插入。未进行泪小管吻合术。将管的两端从鼻孔中取出,然后穿过内眦腱、眼轮匝肌和皮肤修复。将管的两端拉紧,在环上产生张力,直到上下泪小点相互贴合,在内眦区域形成一个小凹陷。将管的两端系紧并固定在鼻孔的内阀上,以维持牵引张力。评估并比较两组患者的下眼睑内陷(>2mm 宽度)、溢泪和结膜充血情况。
与对照组相比,采用牵引技术的患者的内眦角更加对称,下眼睑凹陷畸形最小(P=0.025)。两组均未观察到结膜充血和溢泪。通过双泪道硅胶管的牵引技术可获得对称且美观满意的结果。