IEEE Trans Biomed Eng. 2021 Oct;68(10):3131-3141. doi: 10.1109/TBME.2021.3067910. Epub 2021 Sep 20.
Changes in ultrasound backscatter energy (CBE) imaging can monitor thermal therapy. Catheter-based ultrasound (CBUS) can treat deep tumors with precise spatial control of energy deposition and ablation zones, of which CBE estimation can be limited by low contrast and robustness due to small or inconsistent changes in ultrasound data. This study develops a multi-spatiotemporal compounding CBE (MST-CBE) imaging approach for monitoring specific to CBUS thermal therapy.
Ex vivo thermal ablations were performed with stereotactic positioning of a 180° directional CBUS applicator, temperature monitoring probes, endorectal US probe, and subsequent lesion sectioning and measurement. Five frames of raw radiofrequency data were acquired throughout in 15s intervals. Using window-by-window estimation methods, absolute and positive components of MST-CBE images at each point were obtained by the compounding ratio of squared envelope data within an increasing spatial size in each short-time window.
Compared with conventional US, Nakagami, and CBE imaging, the detection contrast and robustness quantified by tissue-modification-ratio improved by 37.2 ± 4.7 (p < 0.001), 37.5 ± 5.2 (p < 0.001), and 6.4 ± 4.0 dB (p < 0.05) in the MST-CBE imaging, respectively. Correlation coefficient and bias between cross-sectional dimensions of the ablation zones measured in tissue sections and estimated from MST-CBE were up to 0.91 (p < 0.001) and -0.02 mm, respectively.
The MST-CBE approach can monitor the detailed changes within target tissues and effectively characterize the dimensions of the ablation zone during CBUS energy deposition.
The MST-CBE approach could be practical for improved accuracy and contrast of monitoring and evaluation for CBUS thermal therapy.
超声背散射能量(CBE)成像的变化可用于监测热疗。基于导管的超声(CBUS)可以利用对能量沉积和消融区域的精确空间控制来治疗深部肿瘤,其中 CBE 估计可能会受到限制,因为超声数据的对比度低且变化小。本研究开发了一种用于监测 CBUS 热疗的特定的多时空复合 CBE(MST-CBE)成像方法。
使用立体定向定位 180°定向 CBUS 施源器、温度监测探头、经直肠超声探头进行离体热消融,并随后对病变部位进行切片和测量。在 15 秒的时间间隔内采集 5 帧原始射频数据。使用逐窗估计方法,通过在每个短时间窗口内增加空间大小的平方包络数据的复合比,获得每个点的 MST-CBE 图像的绝对值和正分量。
与传统超声、Nakagami 和 CBE 成像相比,MST-CBE 成像的组织修正比量化的检测对比度和稳健性分别提高了 37.2±4.7(p<0.001)、37.5±5.2(p<0.001)和 6.4±4.0dB(p<0.05)。在组织切片中测量的消融区域的横截面尺寸与从 MST-CBE 估计的横截面尺寸之间的相关系数和偏差高达 0.91(p<0.001)和-0.02mm。
MST-CBE 方法可以监测目标组织内的详细变化,并在 CBUS 能量沉积过程中有效表征消融区域的尺寸。
MST-CBE 方法可用于提高 CBUS 热疗监测和评估的准确性和对比度,具有实际意义。