Department of Stem Cell and Regenerative Medicine, Institute of Medical Biotechnology, National Institute of Genetic Engineering and Biotechnology, 14965/161, Tehran, Iran.
Mol Biotechnol. 2021 Jun;63(6):477-490. doi: 10.1007/s12033-021-00315-w. Epub 2021 Mar 23.
One of the most important challenges facing tissue engineering researches is the scaffold design with optimum physical and mechanical properties for growth and proliferation of cells, and tissue formation. The aim of this study was to produce a novel nanocomposite containing β-tricalcium phosphate and layered double hydroxide (β-TCP-LDH) and analyzing the capacity of its osteogenic activity in vitro. In this paper, β-tricalcium phosphate and layered double hydroxide powders were synthesized by co-precipitation processes. Then, the porous nanocomposite granules were prepared by the polyurethane sponge replication method. In this study, four kinds of β-TCP granules containing LDHs nanoparticles (ranging from 0.1 to 10 wt%) have been prepared. X-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive X-ray spectroscopy (EDX) analyses were selected to study the phase structure, morphology, and phase distribution, respectively. Physicochemical characterizations demonstrated that the granules were synthesized successfully. Interconnected macro pores ranging over 200-500 μm were observed for all kinds of granules. SEM micrographs showed that human mesenchymal stem cells (hMSCs) were attached to the surfaces of the granules and proliferated in good shape. The results warranted that the synthesized granules exhibited good biocompatibility and mineralization. Based on the results of compressive strength and porosity tests, the most suitable type of granule is β-TCP/LDH 10 wt% with 77% porosity and compressive modulus of 231.4 MPa, which can be utilized in bone tissue engineering. To our knowledge, layered double hydroxides have not previously been incorporated into tricalcium phosphate granules for bone grafting. Also, this study is the first report on the effects of LDH on the mechanical properties and porosity of β-TCP granules. Our results demonstrated that β-TCP/LDH nanocomposite granule has a great potential for bone defects regeneration and tissue engineering applications.
组织工程研究面临的最重要挑战之一是设计具有最佳物理和机械性能的支架,以促进细胞的生长和增殖以及组织形成。本研究的目的是制备一种新型纳米复合材料,该复合材料含有β-磷酸三钙和层状双氢氧化物(β-TCP-LDH),并分析其体外成骨活性。在本文中,通过共沉淀法合成了β-磷酸三钙和层状双氢氧化物粉末。然后,通过聚氨酯海绵复制法制备多孔纳米复合材料颗粒。在这项研究中,制备了四种含有 LDHs 纳米颗粒的β-TCP 颗粒(范围为 0.1 至 10wt%)。分别选择 X 射线衍射(XRD)、扫描电子显微镜(SEM)和能谱(EDX)分析来研究相结构、形态和相分布。物理化学特性表明成功合成了颗粒。观察到所有类型的颗粒都具有 200-500μm 以上的相互连接的大孔。SEM 显微照片显示,人骨髓间充质干细胞(hMSCs)附着在颗粒表面并以良好的形状增殖。结果表明,合成的颗粒表现出良好的生物相容性和矿化性。根据抗压强度和孔隙率测试的结果,最适合的颗粒类型是β-TCP/LDH 10wt%,具有 77%的孔隙率和 231.4MPa 的抗压模量,可用于骨组织工程。据我们所知,层状双氢氧化物以前从未被掺入用于骨移植的磷酸三钙颗粒中。此外,本研究首次报道了 LDH 对β-TCP 颗粒机械性能和孔隙率的影响。我们的结果表明,β-TCP/LDH 纳米复合材料颗粒具有很大的潜力用于骨缺损再生和组织工程应用。