Department of Respiratory and Critical Care Medicine, Qingdao Municipal Hospital, School of Medicine, Qingdao University, Qingdao, 266021, China.
Department of Occupational and Environmental Health, School of Public Health, Qingdao University, Qingdao, 266021, Shandong, China.
Part Fibre Toxicol. 2021 Mar 25;18(1):14. doi: 10.1186/s12989-021-00406-1.
Diesel exhaust (DE) is a major source of ultrafine particulate matters (PM) in ambient air and contaminates many occupational settings. Airway remodeling assessed using computerized tomography (CT) correlates well with spirometry in patients with obstructive lung diseases. Structural changes of small airways caused by chronic DE exposure is unknown. Wall and lumen areas of 6th and 9th generations of four candidate airways were quantified using end-inhalation CT scans in 78 diesel engine testers (DET) and 76 non-DETs. Carbon content in airway macrophage (CCAM) in sputum was quantified to assess the dose-response relationship.
Environmental monitoring and CCAM showed a much higher PM exposure in DETs, which was associated with higher wall area and wall area percent for 6th generation of airways. However, no reduction in lumen area was identified. No study subjects met spirometry diagnosis of airway obstruction. This suggested that small airway wall thickening without lumen narrowing may be an early feature of airway remodeling in DETs. The effect of DE exposure status on wall area percent did not differ by lobes or smoking status. Although the trend test was of borderline significance between categorized CCAM and wall area percent, subjects in the highest CCAM category has a 14% increase in wall area percent for the 6th generation of airways compared to subjects in the lowest category. The impact of DE exposure on FEV1 can be partially explained by the wall area percent with mediation effect size equal to 20%, P = 0.028).
Small airway wall thickening without lumen narrowing may be an early image feature detected by CT and underlie the pathology of lung injury in DETs. The pattern of changes in small airway dimensions, i.e., thicker airway wall without lumen narrowing caused by occupational DE exposure was different to that (i.e., thicker airway wall with lumen narrowing) seen in our previous study of workers exposed to nano-scale carbon black aerosol, suggesting constituents other than carbon cores may contribute to such differences. Our study provides some imaging indications of the understanding of the pulmonary toxicity of combustion derived airborne particulate matters in humans.
柴油机尾气(DE)是环境空气中超细颗粒物(PM)的主要来源,并污染了许多职业环境。使用计算机断层扫描(CT)评估气道重塑与阻塞性肺疾病患者的肺活量计相关性良好。慢性 DE 暴露引起的小气道结构变化尚不清楚。通过对 78 名柴油机测试员(DET)和 76 名非 DET 患者的吸入后 CT 扫描,对第 6 代和第 9 代 4 个候选气道的壁和腔面积进行了定量分析。气道巨噬细胞中的碳含量(CCAM)在痰中被定量以评估剂量-反应关系。
环境监测和 CCAM 显示 DET 中的 PM 暴露量要高得多,这与第 6 代气道的壁面积和壁面积百分比较高有关。然而,没有发现管腔面积减小。没有研究对象符合气道阻塞的肺活量计诊断。这表明,小气道壁增厚而管腔不狭窄可能是 DET 中气道重塑的早期特征。DE 暴露状况对壁面积百分比的影响不因肺叶或吸烟状况而有所不同。尽管分类 CCAM 与壁面积百分比之间的趋势检验具有边缘显著性,但与最低分类相比,最高 CCAM 类别的研究对象第 6 代气道的壁面积百分比增加了 14%。DE 暴露对 FEV1 的影响可以部分通过壁面积百分比来解释,中介效应大小为 20%,P=0.028)。
小气道壁增厚而管腔不狭窄可能是 CT 检测到的早期图像特征,是 DET 中肺损伤的病理学基础。小气道尺寸变化的模式,即职业性 DE 暴露引起的气道壁增厚而管腔不狭窄,与我们之前对暴露于纳米级碳黑气溶胶的工人的研究不同,这表明除了碳核以外的成分可能导致这种差异。我们的研究为理解燃烧衍生空气颗粒物对人类肺部的毒性提供了一些影像学依据。