Effect of Functionalization of Reduced Graphene Oxide Coatings with Nitrogen and Sulfur Groups on Their Anti-Corrosion Properties.

Electrophoretic production of anticorrosion carbonaceous coatings on copper could be successfully performed by anodic oxidation of negatively charged graphene platelets suspended in an aqueous solution. The various platelets were synthesized by Hummer's method followed by a hydrothermal reduction in the presence of NHSCN which was expected to substitute some parts of graphene structure with nitrogen and sulfur groups. X-ray photoelectron spectroscopy analysis confirmed that the graphene precursors, as well as the coatings, contained typical nitrogen groups, such as pyridinic and pyrrolic, and sulfur groups, such as thiol, thiophene, or C-SO. However, due to oxidation during deposition, the qualitative and quantitative composition of the graphene coatings changed relative to the composition of the precursors. In particular, the concentration of nitrogen and sulfur dropped and some thiophene groups were oxidized to C-SO. Studies showed the functionalized coatings had a uniform, defect-free, hydrophobic, more adhesive surface than nonmodified films. The corrosion measurements demonstrated that these coatings had better protective properties than the ones without these heteroatoms. This behavior can be assigned to the catalytic activity of nitrogen towards oxidation of C-SO groups to C-SOH with oxygen.