Department of Chemistry, Shahjalal University of Science and Technology, Sylhet 3114, Bangladesh.
Department of Chemistry, Jagannath University, Dhaka 1100, Bangladesh.
Molecules. 2021 Mar 8;26(5):1470. doi: 10.3390/molecules26051470.
The thin film of N-doped ZnO/CNT nanocomposite was successfully fabricated on soda lime glass substrate by a simple sol-gel drop-coating method. The structural, morphological, chemical, and optical properties of as prepared samples were characterized by a variety of tools such as X-ray Diffraction (XRD), Field Emission Scanning Electron Microscopy (FE-SEM), Fourier Transform Infrared spectroscopy (FT-IR), and UV-visible spectroscopy. The hexagonal crystalline structure was confirmed from XRD measurement without any other impurity phase detection in samples. The N-doped ZnO/CNT composite showed excellent photo-catalytic activity towards cationic methylene blue (MB) dye degradation with 100% removal rate under UV light irradiation as compared to N-doped ZnO (65%) and pure ZnO (47.36%). The convincing performance has also been observed for the case of visible light irradiation. The enhancement of that photocatalytic activity might be due to narrowing the band gap as well as the reduction of electron-hole pair recombination in ZnO matrix with the incorporation of dopant nitrogen and CNT. It is assumed from the obtained results that N-doped ZnO/CNT nanocomposite thin film can be employed as an economically achievable and ecofriendly method to degrade dye with UV and visible light irradiation. Additionally, density functional theory (DFT) calculations were applied to explore the effect of N-doping on electronic structure of ZnO. The computational study has supported the experimental results of significant band gap contraction, which leads to the maximum absorption towards higher wavelength and no appreciable change of lattice parameters after doping. A conceivable photocatalytic mechanism of N-doped ZnO/CNT nanocomposite has been proposed as well.
通过简单的溶胶-凝胶滴涂法,成功地在钠钙玻璃衬底上制备了掺氮 ZnO/CNT 纳米复合材料薄膜。使用多种工具,如 X 射线衍射(XRD)、场发射扫描电子显微镜(FE-SEM)、傅里叶变换红外光谱(FT-IR)和紫外-可见光谱,对所制备样品的结构、形态、化学和光学性质进行了表征。从 XRD 测量中确认了六方晶结构,而在样品中未检测到任何其他杂质相。与掺氮 ZnO(65%)和纯 ZnO(47.36%)相比,掺氮 ZnO/CNT 复合材料在紫外光照射下对阳离子亚甲基蓝(MB)染料具有优异的光催化活性,达到 100%的去除率。在可见光照射下也观察到了令人信服的性能。这种光催化活性的增强可能归因于掺杂氮和 CNT 导致 ZnO 基质的带隙变窄以及电子-空穴对复合减少。从获得的结果可以推断,掺氮 ZnO/CNT 纳米复合材料薄膜可以作为一种经济可行且环保的方法,用于在紫外光和可见光照射下降解染料。此外,还应用了密度泛函理论(DFT)计算来研究氮掺杂对 ZnO 电子结构的影响。计算研究支持了实验结果,即带隙显著收缩,导致对更高波长的最大吸收,以及掺杂后晶格参数没有明显变化。还提出了掺氮 ZnO/CNT 纳米复合材料的可行光催化机制。