Department of Joint Surgery, The Fourth People's Hospital of Jinan, Jinan, Shandong 250031, China.
Nursing Department, The Fourth People's Hospital of Jinan, Jinan, Shandong 250031, China.
J Healthc Eng. 2021 Mar 26;2021:6691258. doi: 10.1155/2021/6691258. eCollection 2021.
In recent years, the Internet of Things technology has flourished, and there have been corresponding practical results in various fields. In medical care, the introduction of Internet of Things technology must also be a new trend in the development of hospital informatization, and it is the development stage of the digital medical process. The traditional infusion system shows that the infusion bottle is not replaced in time, the infusion waiting time is too long, the infusion efficiency is too low, and the existing medical staff is far from meeting the needs of the huge infusion population. Therefore, this article proposes a technology based on the Internet of Things application of the infusion control system in joint orthopedics nursing work to improve the efficiency of infusion in nursing work. This article deeply learns and uses the Internet of Things technology to build a new infusion management and control system, which is applied to joint orthopedics nursing treatment. This paper designs the application research experiment of the infusion control system. Through the Internet of Things technology, the relevant data in the infusion process are uploaded and sent to the network center of the hospital. Nursing staff can directly see the infusion situation directly through the computer console. This article compares and analyzes two different infusion systems and draws conclusions. The infusion ringing rate of the control group was 81.3%, and the infusion ringing rate of the IoT group was 29.8%; the time for timely replacement of the infusion bottle after IoT data control was 13.89 min, compared to 19.76 min before. A variety of data results show that the infusion management and control system based on the Internet of Things technology has played a great role in joint orthopedics care, which can greatly improve the efficiency of infusion, replace the infusion or deal with failures in time for patients, and improve patient satisfaction.
近年来，物联网技术蓬勃发展，在各个领域都取得了相应的实践成果。在医疗保健领域，物联网技术的引入也必定是医院信息化发展的新趋势，是数字化医疗进程的发展阶段。传统的输液系统存在输液瓶更换不及时、输液等待时间过长、输液效率过低等问题，现有的医护人员远远不能满足庞大的输液人群的需求。因此，本文提出了一种基于物联网技术的输液控制系统在关节骨科护理工作中的应用技术，以提高护理工作中的输液效率。本文深入学习和运用物联网技术，构建了一种新的输液管理和控制系统，应用于关节骨科护理治疗。本文设计了输液控制系统的应用研究实验。通过物联网技术，将输液过程中的相关数据上传并发送到医院的网络中心。护理人员可以直接通过电脑控制台直接看到输液情况。本文对比分析了两种不同的输液系统，并得出结论。对照组的输液响铃率为 81.3%，物联网组的输液响铃率为 29.8%；物联网数据控制后及时更换输液瓶的时间为 13.89 分钟，而之前为 19.76 分钟。各种数据结果表明，基于物联网技术的输液管理和控制系统在关节骨科护理中发挥了重要作用，能极大地提高输液效率，及时为患者更换输液或处理故障，提高患者满意度。
