Department of Neurosurgery, University Hospital Münster, Münster, Germany.
Department of Neurosurgery, University Hospital Münster, Münster, Germany.
World Neurosurg. 2021 Jul;151:277-283.e1. doi: 10.1016/j.wneu.2021.04.068. Epub 2021 Apr 27.
Stand-alone minimally invasive approaches for the surgical management of spinal dumbbell tumors carry the risk of incomplete resections and impaired hemostasis. More-extensive approaches require subsequent instrumentation with metal artifacts impairing follow-up imaging. Here, we present a technical note on percutaneous instrumentation using carbon fiber-reinforced polyether ether ketone (CFR-PEEK) hardware combined with a minimally invasive posterolateral approach for tumor resection.
We present a Technical Note and according case series of 7 patients with dumbbell tumors in the lumbar and thoracolumbar spine operated on between 2017 and 2020. CFR-PEEK pedicle screws and rods were inserted percutaneously. Afterwards, a dedicated self-standing retractor for posterolateral approaches was connected to the screws. Following a unilateral facetectomy, the tumor was resected in a microsurgical fashion. Clinical data are reported with respect to the Preferred Reporting Of CasE Series in Surgery (PROCESS) guidelines.
Four patients presented with de novo tumors. Three patients were treated for residual tumor mass after previous surgeries. Gross total resection was achieved in all 7 cases, as demonstrated by early postoperative magnetic resonance imaging. Histopathology demonstrated 5 World Health Organization grade I schwannomas, 1 grade II hemangiopericytoma, and 1 cavernous hemangioma. No postoperative complications were observed. CFR-PEEK hardware allowed unambiguous visualization of the resection cavity on follow-up imaging.
Resection of dumbbell tumors via a minimally invasive posterolateral approach and instrumentation with CFR-PEEK hardware allows maximal and safe resection. Due to lack of major metal artifacts, carbon fiber hardware improves the interpretation of follow-up imaging as well as planning of radiation if required for tumor recurrence.
孤立的微创方法治疗脊柱哑铃状肿瘤存在不完全切除和止血效果不佳的风险。更广泛的方法需要随后使用金属植入物进行器械固定,这会影响后续的影像学检查。在这里,我们提出了一种使用碳纤维增强聚醚醚酮(CFR-PEEK)硬件进行经皮器械固定的技术说明,并结合微创后外侧入路进行肿瘤切除。
我们提出了一个技术说明和一个根据病例系列,7 例腰椎和胸腰椎哑铃状肿瘤患者于 2017 年至 2020 年期间接受手术。CFR-PEEK 椎弓根螺钉和棒通过经皮插入。然后,将专用的自支撑后外侧入路牵开器连接到螺钉上。在单侧关节突切除后,以微创手术方式切除肿瘤。根据外科手术首选报告病例系列(PROCESS)指南报告临床数据。
4 例患者为新发肿瘤。3 例患者为既往手术后残留肿瘤。7 例患者均实现了大体全切除,术后早期磁共振成像显示。组织病理学显示 5 例为世界卫生组织(WHO)I 级神经鞘瘤,1 例为 II 级血管外皮细胞瘤,1 例为海绵状血管瘤。未观察到术后并发症。CFR-PEEK 硬件允许在随访影像学检查中明确显示切除腔。
通过微创后外侧入路切除哑铃状肿瘤并使用 CFR-PEEK 硬件进行器械固定可实现最大程度和安全的切除。由于缺少主要的金属植入物,碳纤维硬件可改善随访影像学检查的解读,并在肿瘤复发时为放射治疗提供更好的规划。