Suppr超能文献

模拟缺陷和增强脊柱节段的三维表面应变分析:一项生物力学尸体研究。

Three-dimensional surface strain analyses of simulated defect and augmented spine segments: A biomechanical cadaveric study.

机构信息

Department of Physiology and Biomedical Engineering, Mayo Clinic, Rochester, MN, USA; Department of Orthopedic Surgery, Mayo Clinic, Rochester, MN, USA.

Department of Biomedical Engineering and Chemical Engineering, University of Texas at San Antonio, San Antonio, TX, USA.

出版信息

J Mech Behav Biomed Mater. 2021 Jul;119:104559. doi: 10.1016/j.jmbbm.2021.104559. Epub 2021 Apr 23.

Abstract

While several studies have investigated fracture outcomes of intact vertebrae, fracture properties in metastatically-involved and augmented vertebrae are still far from understood. Consequently, this study was aimed to use 3D digital image correlation (3D-DIC) method to investigate the failure properties of spine segments with simulated metastatic lesions, segments augmented with poly(propylene fumarate) (PPF), and compare the outcomes with intact spines. To this end, biomechanical experiments accompanied by 3D-DIC were performed on spine segments consisting of three vertebrae and two intervertebral discs (IVDs) at loading rates of 0.083 mm/s, mimicking a physiological loading condition, and 200 mm/s, mimicking an impact-type loading condition such as a fall or an accident. Full-field surface strain analysis indicated PPF augmentation reduces the superior/inferior strain when compared with the defect specimens; Presence of a defect in the middle vertebra resulted in shear band fracture pattern. Failure of the superior endplates was confirmed in several defect specimens as the superior IVDs were protruding out of defects. The augmenting PPF showed lower superior/inferior surface strain values at the fast speed as compared to the slow speed. The results of our study showed a significant increase in the fracture force from slow to fast speeds (p = 0.0246). The significance of the study was to determine the fracture properties of normal, pathological, and augmented spinal segments under physiologically-relevant loading conditions. Understanding failure properties associated with either defect (i.e., metastasis lesion) or augmented (i.e., post-treatment) spine segments could potentially provide new insights on the outcome prediction and treatment planning. Additionally, this study provides new knowledge on the effect of PPF augmentation in improving fracture properties, potentially decreasing the risk of fracture in osteoporotic and metastatic spines.

摘要

虽然已有多项研究调查了完整椎体的骨折结果,但转移性和增强椎体的骨折特性仍知之甚少。因此,本研究旨在使用三维数字图像相关(3D-DIC)方法研究模拟转移性病变的脊柱节段、用聚(富马酸丙二醇酯)(PPF)增强的节段的失效特性,并将结果与完整脊柱进行比较。为此,在加载速率为 0.083 mm/s(模拟生理加载条件)和 200 mm/s(模拟跌倒或事故等冲击式加载条件)的情况下,对由三个椎体和两个椎间盘(IVD)组成的脊柱节段进行了生物力学实验和 3D-DIC 测试。全场表面应变分析表明,与缺陷标本相比,PPF 增强可降低上下应变;中间椎体存在缺陷会导致剪切带断裂模式。在几个缺陷标本中,由于上 IVD 从缺陷中突出,确认了上终板的失效。与低速相比,在高速下,增强的 PPF 表现出较低的上下表面应变值。我们的研究结果表明,从低速到高速,骨折力显著增加(p=0.0246)。本研究的意义在于确定正常、病理和增强的脊柱节段在生理相关加载条件下的骨折特性。了解与缺陷(即转移病变)或增强(即治疗后)脊柱节段相关的失效特性,可能为预测结果和治疗计划提供新的见解。此外,本研究还提供了关于 PPF 增强在改善骨折特性方面的新知识,可能降低骨质疏松症和转移性脊柱骨折的风险。

相似文献

本文引用的文献

2
Mechanical testing setups affect spine segment fracture outcomes.力学测试装置会影响脊柱节段骨折的结果。
J Mech Behav Biomed Mater. 2019 Dec;100:103399. doi: 10.1016/j.jmbbm.2019.103399. Epub 2019 Aug 17.

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验