Effect of dietary calcium and phosphorus level sequences on performance, structural soundness and bone characteristics of growing-finishing swine.

The effects of feeding various dietary Ca:P level sequences on gain and feed efficiency, leg structural soundness and bone indices of growing-finishing swine were evaluated as an incomplete 3 X 3 factorial arrangement of treatments in a split-plot design. A total of 664 pigs were fed one of three total dietary Ca:P levels (.52:.40, .65:.50, .80:.60%) from 19-kg to 56-kg body weights followed by one of three Ca:P levels (.45:.32, .52:.40, .65:.50%) to market weight. The .80:.60% and .65:.50% Ca:P mineral sequence was not evaluated. Diets were formulated to 14.5% crude protein using a corn-soybean meal mixture with proportions of dicalcium phosphate and limestone altered to attain the desired dietary Ca:P levels. Maximum gains occurred at the .65:.50% and .52:.40% Ca:P level during the grower (P less than .01) and finisher (P less than .01) periods, respectively. No grower X finisher phase pig gain or feed intake interaction resulted, providing evidence of no carry-over response on these measurements from the grower to the finisher period. Serum P concentration increased and plateaued at the same dietary Ca:P level, as did rate of gain at both 56-kg and 95-kg body weights. Leg soundness subjectively evaluated at 56-kg and 95-kg body weights revealed no effect of dietary Ca:P level on soundness scores at 56 kg, but at 95-kg body weight, the interaction between grower and finisher diets was significant. Percentage bone ash of the humerus, shaft thickness and bending moment of the femur increased as dietary Ca:P level increased at both 56-kg and 95-kg body weights.(ABSTRACT TRUNCATED AT 250 WORDS)