Cheng Zhengbo, Tan Yi, Gao Zhe, Wang Shouzhi, Wang Binbin, Liu Wenbin
Department of Engineering Physics, Tsinghua University, Beijing 10084, People's Republic of China.
Rev Sci Instrum. 2021 May 1;92(5):053518. doi: 10.1063/5.0043631.
Since the major/minor radius of the Sino-United Spherical Tokamak (SUNIST) is 0.3/0.23 m, respectively, the space left for magnetic diagnostics in the high field side (HFS) is quite limited. At the same time, a good signal-to-noise ratio and a high-frequency response (up to 1 MHz) are required for equilibrium reconstruction (ER) and Alfven eigenmode studies. Such a magnetic probe array must be extremely thin and tightly close to the central column, not exceeding the inner limiter and leaving the aspect ratio of the spherical tokamak unchanged. Therefore, the turn number and the shape of windings should be highly optimized to enable both a high-frequency response and an enough effective area. A 32-channel magnetic probe array fulfilling these requirements on the central column is designed, calibrated, and installed in the SUNIST. The array consists of 16 probes. Each of them consists of two perpendicular windings, which can measure toroidal and poloidal magnetic fields simultaneously. The effective area and frequency response of each probe are calibrated using a Helmholtz coil and an LCR bridge based on an equivalent probe-and-cable circuit model. After that, an expression of the magnetic diagnostic response to the field coil currents is used to calibrate the installation error. With the full coverage of magnetic probes in the poloidal direction, more reliable ER can be obtained, and the features of magnetohydrodynamic activities in the HFS can be studied.
