Estimation of minimal wrestling weight using measures of body build and body composition.

This study evaluated field methods for establishing minimal body weight in wrestlers based upon estimates of fat-free body weight (FFB): 239 high school wrestlers were measured for height, weight, 13 diameters, 24 circumferences, and 7 skinfolds, as well as for underwater weight to determine body density and resultant FFB. To estimate FFB, anthropometric models were used which were based upon diameters, circumferences, and/or skinfolds. Correlations between actual and predicted FFB were high, ranging from r = 0.89 to 0.92 for the models employing diameters and r = 0.96 for those employing circumferences, which respectively increased to r = 0.96 and r = 0.97 when body weight was included in theses models. The skinfold-based and mixed model estimates of FFB were r = 0.97 and r = 0.91 to 0.97, respectively. The corresponding total error (TE) in these estimates for the diameter-based models ranged from 6.54 to 3.80 kg (inclusion of body weight further reduced TE to 2.77 kg). Among the circumference models, TE ranged from 2.50 to 2.33 kg, with inclusion of body weight accounting for the lower value. Skinfold-based estimates of FFB demonstrated a TE level ranging from 2.48 to 2.33 kg. The lowest TE (2.32 kg) was demonstrated by a mixed model which included skinfolds, diameter, height, and body weight. Cross-validation of these new equations revealed the lowest TE values (less than 2.2 kg) for the skinfold and the mixed model equations, thereby identifying highly valid field techniques for determining the present level of FFB, which can serve as the basis upon which minimal body weight estimates can be made.