Sun Tinghan, Zhang Hangzhou
China Medical University, Shenyang, China.
Department of Orthopedics, Joint Surgery and Sports Medicine, First Affiliated Hospital of China Medical University, Shenyang, China.
Orthop J Sports Med. 2021 Aug 25;9(8):23259671211028559. doi: 10.1177/23259671211028559. eCollection 2021 Aug.
Controversy remains regarding the optimal technique for tibial fixation of soft tissue grafts in anterior cruciate ligament (ACL) reconstruction.
PURPOSE/HYPOTHESIS: To compare the biomechanical outcomes of a novel transtibial tubercle fixation technique with those of a commonly utilized interference screw fixation at the tibial site. Our hypothesis was that transtibial tubercle fixation achieves higher ultimate failure loads than interference screw fixation.
Controlled laboratory study.
We used 24 matched porcine tibias and digital extensor tendons, from which 12 grafts and tibial tunnels were prepared using the novel transtibial tubercle fixation technique and 12 were prepared using the interference screw fixation technique. The specimens underwent a cyclic loading test (50-250 N applied for 1000 cycles at a frequency of 1 Hz), followed by a load-to-failure test. The slippage, stiffness, and ultimate failure loads were compared between the techniques.
No differences in slippage were found during the cyclic loading test, and no graft fixation or tibial complex failures occurred during cyclic testing in either group. The transtibial tubercle fixation technique had higher ultimate failure loads (mean ± SD, 756.28 ± 123.43 N) as compared with interference screw fixation (602.15 ± 81.62 N; < .05). The grafts in the transtibial tubercle fixation group were less stiff than those in the interference screw fixation group (84.43 vs 101.23 N/mm; < .05).
Transtibial tubercle fixation achieved higher ultimate failure loads than interference screw fixation in the load-to-failure test.
The novel transtibial tubercle fixation technique compared favorably with interference screw fixation during ACL reconstruction. This technique does not require hardware, has a low cost, theoretically eliminates the risk of complications associated with hardware implantation (eg, graft damage and pain attributed to retained hardware requiring removal), and is relatively easy to perform.
在前交叉韧带(ACL)重建中,软组织移植物胫骨固定的最佳技术仍存在争议。
目的/假设:比较一种新型经胫骨结节固定技术与常用的胫骨部位干涉螺钉固定技术的生物力学结果。我们的假设是经胫骨结节固定比干涉螺钉固定能达到更高的最终破坏载荷。
对照实验室研究。
我们使用24对匹配的猪胫骨和趾长伸肌腱,其中12个移植物和胫骨隧道采用新型经胫骨结节固定技术制备,12个采用干涉螺钉固定技术制备。标本进行循环加载试验(以1Hz的频率施加50 - 250N的力,持续1000个循环),随后进行破坏载荷试验。比较两种技术之间的滑移、刚度和最终破坏载荷。
在循环加载试验中未发现滑移差异,两组在循环测试期间均未发生移植物固定或胫骨复合体破坏。与干涉螺钉固定(602.15±81.62N)相比,经胫骨结节固定技术具有更高的最终破坏载荷(均值±标准差,756.28±123.43N;P <.05)。经胫骨结节固定组的移植物比干涉螺钉固定组的移植物刚度更低(84.43对101.23N/mm;P <.05)。
在破坏载荷试验中,经胫骨结节固定比干涉螺钉固定能达到更高的最终破坏载荷。
在ACL重建过程中,新型经胫骨结节固定技术与干涉螺钉固定相比具有优势。该技术不需要硬件,成本低,理论上消除了与硬件植入相关的并发症风险(例如,移植物损伤和因保留硬件需要取出而导致的疼痛),并且相对容易实施。