Application of Reinforcement Learning Algorithm Model in Gas Path Fault Intelligent Diagnosis of Gas Turbine.

Gas turbine is widely used because of its advantages of fast start and stop, no pollution, and high thermal efficiency. However, the working environment of high temperature, high pressure, and high speed makes the gas turbine prone to failure. The traditional gas path fault intelligent diagnosis scheme of the gas turbine has the problems of poor control effect and low scheduling accuracy. Experiment studies the application of neural network and reinforcement learning algorithm in gas path fault intelligent diagnosis of the gas turbine. The accurate control of fault diagnosis planning is realized from gas path fault diagnosis, daily maintenance, service condition monitoring, power utilization rate, and other aspects of the gas turbine. The reinforcement learning model can realize the intelligent diagnosis and record of gas path fault of the gas turbine, to achieve diversified analysis and intelligent diagnosis scheme. Through neural network algorithm and deep learning technology, the whole process monitoring of the gas turbine is realized, and the failure rate of the gas turbine in the working process is reduced. The experimental results show that, compared with the thermal fault diagnosis method and the fault diagnosis method of the electric percussion drill, using thermal imaging, the gas turbine gas path fault intelligent diagnosis model based on the reinforcement learning algorithm can complete the data information in the process of real-time data transmission. The quantified conversion and processing of the system has the advantages of higher control accuracy and faster response speed, which can effectively improve the diagnostic efficiency and accuracy.