Department of Orthopaedics and Trauma, Medical University of Graz, Graz, Austria.
Department of Orthopaedic Surgery, Chang Gung Memorial Hospital, Taoyuan, Taiwan.
Orthop Surg. 2021 Oct;13(7):2153-2162. doi: 10.1111/os.12911. Epub 2021 Oct 4.
To specify the concentration of the liquid antibiotics to be added to polymethylmethacrylate (PMMA) and its impact on the quality of the spacer is the purpose of this study with liquid clindamycin added to different cements.
In the present study, eight different cement mixtures were prepared and investigated. In the following, number 1 indicates the references, 2 all cements after liquid clindamycin was added to the liquid cement compound, 3 all cements after liquid clindamycin was added to the cement powder, and 4 all cements after liquid clindamycin was added to the cement dough. After curing, cements were filled into metal moulds and a pressure of 3 bar was maintained for 30 min. Mechanical investigations were carried out according to ISO 5833 (2002) and DIN 53435 (2007). For microbiological tests, standardized cylindrical mouldings (diameter: 25 mm, height: 10 mm) were produced and incubated in 10 ml buffer solution at room temperature for 24 h. All eluates were generated by spreading previously established suspensions of Staphylococcus aureus, Staphylococcus epidermidis, Cutibacterium acnes and methicillin-resistant Staphylococcus aureus (MRSA) with a 0.5 McFarland turbidity standard.
Apparently, we found that in all investigated cases, the admixture of liquid antibiotic negatively affected the mechanical characteristics of the cement mould. Among the various test groups, the influence on the ISO compression strength and ISO flexural modulus of the investigated test groups was only minimal when liquid clindamycin was added to cement liquid. Compared to admixing of liquid clindamycin into cement powder or dough ISO compression strength and ISO flexural modulus and flexural strength showed the maximum reduction. The efficacy against chosen germs was reduced as well when liquid antibiotic was admixed instead of powder. This admixture of liquid anti-infective agents resulted in a 234% enhanced elution after 10 days 29 a negative effect on the inhibition zones were detected during the previous period.
The admixture of powdery antibiotic is preferable to liquid antibiotics. If no powdery antibiotic is available, we can recommend the admixture of liquid antibiotic to liquid cement prior to dough production in case powdery antibiotics cannot be used. However, we discourage the admixture of liquid antibiotic to cement powder or cement dough during early low viscose phase.
确定添加到聚甲基丙烯酸甲酯(PMMA)中的液体抗生素的浓度及其对间隔物质量的影响,这是本研究的目的,研究中向不同的水泥中添加了液体克林霉素。
在本研究中,制备并研究了 8 种不同的水泥混合物。以下数字 1 表示参考文献,2 表示所有添加液体克林霉素后的液体水泥混合物,3 表示所有添加液体克林霉素后的水泥粉末,4 表示所有添加液体克林霉素后的水泥糊剂。固化后,将水泥填充到金属模具中,并保持 3 巴的压力 30 分钟。根据 ISO 5833(2002)和 DIN 53435(2007)进行机械研究。对于微生物测试,生产标准化的圆柱形模具(直径:25 毫米,高度:10 毫米),并在室温下将其在 10 毫升缓冲溶液中孵育 24 小时。所有洗脱液均通过用 0.5 McFarland 浊度标准预先建立的金黄色葡萄球菌、表皮葡萄球菌、痤疮丙酸杆菌和耐甲氧西林金黄色葡萄球菌(MRSA)悬浮液进行扩散生成。
显然,我们发现,在所有研究的情况下,抗生素液体的混合物对水泥模具的机械特性产生负面影响。在各种测试组中,当将液体克林霉素添加到水泥液体中时,对测试组的 ISO 压缩强度和 ISO 弯曲模量的影响最小。与将液体克林霉素混合到水泥粉末或糊剂中相比,ISO 压缩强度和 ISO 弯曲模量以及弯曲强度显示出最大的降低。当将液体抗生素混合而不是粉末混合时,对选定细菌的功效也降低了。抗生素混合液的添加导致在第 10 天时洗脱量增加了 234%,在之前的阶段检测到对抑菌圈的负面影响。
粉末状抗生素的混合优于液体抗生素。如果没有粉末状抗生素,我们可以建议在生产糊剂之前,将液体抗生素添加到液体水泥中,而不是在无法使用粉末抗生素的情况下使用。然而,我们不鼓励在低粘性早期阶段将液体抗生素混合到水泥粉末或水泥糊剂中。