Song Dong Hoon, Seo Hong-Seok
Opt Express. 2021 Sep 27;29(20):32649-32657. doi: 10.1364/OE.438230.
The achievement of a high average power exceeding 1 W remains a major challenge for direct-diode pumped and mode-locked femtosecond Ti:sapphire lasers. Herein, we demonstrate high-power soliton-like pulses from a direct spectrally combined three-diode-pumped and semiconductor saturable absorber mirror (SESAM)-based mode-locked Ti:sapphire laser. Its mode-locked output power of up to 1 W was obtained in correspondence with a 68.8 MHz repetition rate and 55 fs pulse duration; thus, the pulse energy and peak power are 14.5 nJ and 264 kW, respectively. To the best of our knowledge, this is the highest reported output power and pulse energy from a Ti:sapphire laser with three spectrally combined pump diodes (471 nm, 491 nm, and 525 nm) and a simple beam expander. For efficient pumping, the combined pump beam, directed into the lens (f = 60 mm), which comprised three aspheric lenses along the fast axis and a shared cylindrical beam telescope (8× magnification) along the slow axis, resulting in a circular-focused beam in the Ti:sapphire crystal. The beam waist was measured to be 39 μm ×38 μm along the slow and fast axes.
对于直接二极管泵浦和锁模飞秒钛宝石激光器而言,实现超过1瓦的高平均功率仍然是一项重大挑战。在此,我们展示了一种基于直接光谱组合的三二极管泵浦和半导体可饱和吸收镜(SESAM)的锁模钛宝石激光器产生的高功率类孤子脉冲。其锁模输出功率高达1瓦,重复频率为68.8兆赫兹,脉冲持续时间为55飞秒;因此,脉冲能量和峰值功率分别为14.5纳焦和264千瓦。据我们所知,这是具有三个光谱组合泵浦二极管(471纳米、491纳米和525纳米)和一个简单扩束器的钛宝石激光器所报道的最高输出功率和脉冲能量。为了实现高效泵浦,组合泵浦光束被导向透镜(焦距f = 60毫米),该透镜沿快轴由三个非球面透镜组成,沿慢轴由一个共享的柱面光束望远镜(放大倍数为8倍)组成,从而在钛宝石晶体中形成圆形聚焦光束。沿慢轴和快轴测量的束腰分别为39微米×38微米。