Suppr超能文献

共处理干黏合剂润滑混合物的流变性和压片性质研究。

Study of rheological and tableting properties of lubricated mixtures of co-processed dry binders for orally disintegrating tablets.

机构信息

Department of Pharmaceutical Technology, Faculty of Pharmacy, Charles University, Akademika Heyrovského 1203, 500 05 Hradec Králové, Czech Republic.

Institute of Process Engineering, Faculty of Mechanical Engineering, Slovak University of Technology in Bratislava, Nám. slobody 17, 812 31 Bratislava 1, Slovakia.

出版信息

Eur J Pharm Sci. 2022 Jan 1;168:106035. doi: 10.1016/j.ejps.2021.106035. Epub 2021 Oct 8.

Abstract

Co-processed dry binders for ODTs are important multifunctional excipients for tablet manufacturing by direct compression. Testing their binary mixtures with lubricants is an important aspect of their use in combination with drugs. The aim of this study was to evaluate the rheological and compression properties of lubricated mixtures of co-processed dry binders Parteck® ODT, Prosolv® ODT G2 and Ludiflash®, and subsequently also the compactability and disintegration time of the tablets made thereof. The lubricants employed were magnesium stearate and sodium stearyl fumarate in the concentrations of 0.5% and 1%. The best flowability was shown by Prosolv® ODT G2 combined with magnesium stearate in the concentration of 0.5%. Lubricated mixtures with Prosolv® ODT G2 showed a lower angle of internal friction as well as lower pre-compression energy values. The values of plastic deformation energy were the highest in the case of Prosolv® ODT G2, which was also reflected in the highest tablet strength. On the contrary, the ejection force values were the lowest for this co-processed dry binder. Magnesium stearate reduced the ejection force more effectively than sodium stearyl fumarate. Prosolv® ODT G2 tablets exhibited the highest tensile strength and shortest disintegration time.

摘要

共处理干粘合剂是直接压缩法制造 ODT 的重要多功能赋形剂。测试它们与润滑剂的二元混合物是它们与药物联合使用的一个重要方面。本研究的目的是评估润滑共处理干粘合剂 Partek®ODT、Prosolv®ODT G2 和 Ludiflash®混合物的流变性和压缩性能,随后评估由此制成的片剂的可压缩性和崩解时间。所使用的润滑剂为硬脂酸镁和富马酸硬脂酸钠,浓度分别为 0.5%和 1%。在 0.5%浓度下,Partek®ODT 和硬脂酸镁结合显示出最佳的流动性。含 Prosolv®ODT G2 的润滑混合物具有较低的内摩擦角和较低的预压缩能量值。在 Prosolv®ODT G2 的情况下,塑性变形能的值最高,这也反映在片剂的最高强度上。相反,对于这种共处理干粘合剂,推出力的值最低。硬脂酸镁比富马酸硬脂酸钠更有效地降低推出力。Prosolv®ODT G2 片剂表现出最高的拉伸强度和最短的崩解时间。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验