Balsamo Stefano Andrea, Fiorenza Roberto, Condorelli Marcello, Pecoraro Roberta, Brundo Maria Violetta, Lo Presti Francesca, Sciré Salvatore
Department of Chemical Sciences, University of Catania, Viale A. Doria 6, 95125 Catania, Italy.
Department of Biological, Geological and Environmental Science, University of Catania, Via Androne 81, 95124 Catania, Italy.
Materials (Basel). 2021 Oct 10;14(20):5938. doi: 10.3390/ma14205938.
A non-conventional approach to prepare titanium dioxide-reduced graphene oxide (TiO-rGO) nanocomposites based on solar photoreduction is here presented. The standard hydro-solvothermal synthesis of the TiO-rGO composites requires high temperatures and several steps, whereas the proposed one-pot preparation allows one to obtain the photocatalysts with a simple and green procedure, by exploiting the photocatalytic properties of titania activated by the solar irradiation. The TiO-rGO catalysts were tested in the solar photodegradation of a widely adopted toxic herbicide (2,4-Dichlorophenoxyacetic acid, 2,4-D), obtaining the 97% of degradation after 3 h of irradiation. The as-prepared TiO-rGO composites were more active compared to the same photocatalysts prepared through the conventional thermal route. The structural, optical, and textural properties of the composites, determined by Raman, Photoluminescence, Fourier Transform InfraRed (FTIR), UV-vis diffuse reflectance (DRS) spectroscopies, and N absorption-desorption measurements, showed as the solar irradiation favors the reduction of graphene oxide with higher efficiency compared to the thermal-driven synthesis. Furthermore, the possible toxicity of the as-synthesized composites was measured exposing nauplii of microcrustacean sp. to solutions containing TiO-rGO. The good results in the 2,4-D degradation process and the easiness of the TiO-rGO synthesis allow to consider the proposed approach a promising strategy to obtain performing photocatalysts.
本文提出了一种基于太阳能光还原制备二氧化钛-还原氧化石墨烯(TiO-rGO)纳米复合材料的非常规方法。TiO-rGO复合材料的标准水热溶剂热合成需要高温和多个步骤,而所提出的一锅法制备通过利用太阳辐射激活的二氧化钛的光催化性能,能够以简单且绿色的程序获得光催化剂。在广泛使用的有毒除草剂(2,4-二氯苯氧乙酸,2,4-D)的太阳光光降解中对TiO-rGO催化剂进行了测试,辐照3小时后降解率达到97%。与通过传统热路线制备的相同光催化剂相比,所制备的TiO-rGO复合材料活性更高。通过拉曼光谱、光致发光、傅里叶变换红外(FTIR)光谱、紫外可见漫反射(DRS)光谱以及N吸附-脱附测量确定的复合材料的结构、光学和织构性质表明,与热驱动合成相比,太阳辐射更有利于以更高效率还原氧化石墨烯。此外,通过将微甲壳动物的无节幼体暴露于含有TiO-rGO的溶液中来测量所合成复合材料的潜在毒性。2,4-D降解过程中的良好结果以及TiO-rGO合成的简便性使得该方法有望成为获得高性能光催化剂的策略。