Clinical application of a method to correct angle ANB for geometric effects.

Angle ANB does not provide an adequate assessment of the skeletal discrepancy between the jaws in the sagittal plane. Attempts have been made to avoid the fallacies with the introduction of quadrilateral and Wits analyses. Based on the Wits appraisal of zero, Hussels and Nanda (1984) were able to evaluate and eliminate four geometric factors that affect angle ANB. These four factors are (1) anteroposterior position of point N in relation to points A and B, (2) inclination of the occlusal plane, (3) dental height (a linear measurement between point A and B), and (4) distance between points N and B. The authors derived a mathematic formula to evaluate the influence of all four parameters in terms of angle ANB. This formula reflects the skeletal relationship of a patient when points A and B are on a perpendicular plane in relation to the occlusal plane (Wits = 0 mm). The authors define this to be a Class I skeletal relationship. A comparison of the measured ANB angle with the calculated angle ANB gives a better perspective of the skeletal discrepancy. If the measured angle ANB is larger than the calculated angle, the discrepancy is Class II. On the other hand, if the measured angle ANB is smaller than the calculated angle, the skeletal relation is Class III. This method of assessing the skeletal sagittal position of the jaws in relation to each other was applied to 508 patients. The authors showed that the geometric influence of the four factors indeed conceals the true skeletal relations when angle ANB is used without any correction.(ABSTRACT TRUNCATED AT 250 WORDS)