Treatment of hazardous organic amine wastewater and simultaneous electricity generation using photocatalytic fuel cell based on TiO/WO photoanode and Cu nanowires cathode.

Organic amines are regarded as high toxic, refractory chemicals due to the great damage on human body, and ecosystem. The treatment of organic amine wastewater involves the removal of total nitrogen and toxic organics simultaneously, which is one of the biggest difficulties in wastewater treatment. In this study, hazardous organic amine wastewater was purified by a photocatalytic fuel cell (PFC) with efficient nitrogen removal and organic degradation, and its chemical energy was recovered simultaneously based on hydroxyl radical (HO·) and chlorine radical (Cl·) reaction in a novel TiO/WO and 3D Cu nanowires modified Cu foam (CuNWs/CF) system. TiO/WO heterojunction as photoanode provided rapid charge separation and good stability, and the composite of poly-Si enhanced the light harvest and charge transfer. HO· played critical role in degrading organic amines, while Cl· was responsible for selectively oxidizing amine group or NH to N. Besides, trace amount of NO and NO formed by over-oxidation was eliminated on CuNWs/CF cathode due to large specific surface area and fast charge transfer. Moderate Cl concentration and initial pH had vital influence on strengthening Cl· and HO· generation in the system, and the optimal conditions were 50 mM NaCl and pH = 7. For methylamine, ethylamine and dimethylamine wastewater, the system showed total nitrogen removal efficiency of 94.93%, 91.81%, 93.10% and total organic carbon removal of 58.47%, 53.57%, and 56.71% within 2 h, respectively. Moreover, the corresponding maximum power densities of 2.49, 2.40, 2.27 mW cm were also generated, respectively. The study proposes an efficient, sustainable method for the treatment of hazardous organic amine wastewater and simultaneous energy recovery.