School of Electrical and Data Engineering, Faculty of Engineering and Information Technology, University of Technology Sydney, Ultimo, NSW, 2007, Australia.
CSIRO Manufacturing, 36 Bradfield Road, Lindfield, NSW 2070, Australia.
J Neural Eng. 2021 Dec 23;18(6). doi: 10.1088/1741-2552/ac4085.
. Brain-machine interfaces are key components for the development of hands-free, brain-controlled devices. Electroencephalogram (EEG) electrodes are particularly attractive for harvesting the neural signals in a non-invasive fashion.Here, we explore the use of epitaxial graphene (EG) grown on silicon carbide on silicon for detecting the EEG signals with high sensitivity.This dry and non-invasive approach exhibits a markedly improved skin contact impedance when benchmarked to commercial dry electrodes, as well as superior robustness, allowing prolonged and repeated use also in a highly saline environment. In addition, we report the newly observed phenomenon of surface conditioning of the EG electrodes. The prolonged contact of the EG with the skin electrolytes functionalize the grain boundaries of the graphene, leading to the formation of a thin surface film of water through physisorption and consequently reducing its contact impedance more than three-fold. This effect is primed in highly saline environments, and could be also further tailored as pre-conditioning to enhance the performance and reliability of the EG sensors.
脑机接口是开发免手控、脑控设备的关键组成部分。脑电图(EEG)电极特别适合以非侵入式方式采集神经信号。在这里,我们探索了在碳化硅上外延生长的石墨烯(EG)在硅上用于以高灵敏度检测 EEG 信号的用途。与商业干电极相比,这种干燥且非侵入式的方法具有明显改善的皮肤接触阻抗,并且具有更高的鲁棒性,即使在高盐环境中也允许长时间和重复使用。此外,我们报告了 EG 电极表面条件作用的新观察到的现象。EG 与皮肤电解质的长时间接触使石墨烯的晶界官能化,导致通过物理吸附形成一层薄薄的水表面膜,从而使其接触阻抗降低三分之二以上。这种效应在高盐环境中得到促进,并且可以进一步定制预处理以增强 EG 传感器的性能和可靠性。