Effect of Ground Granulated Blast Furnace Slag Replacement Ratio on Structural Performance of Precast Concrete Beams.

This study was conducted to investigate the effect of ground granulated blast furnace slag on the structural performance of precast concrete beams, evaluating the flexural, shear and bonding performance by using the replacement ratio of the ground granulated blast furnace slag as a variable. The design strength of the concrete was set at 45 MPa in consideration of the characteristics of precast concrete products, and the replacement ratio of the ground granulated blast furnace slag to replace cement was 30 to 70%. The experimental results showed that all specimens had similar behavioral characteristics regardless of the replacement ratio of the ground granulated blast furnace slag. Comparison of the prediction results obtained by ACI 318-19 and EC 2 showed that the mean flexural strength and shear strength were higher than 1.19 and 1.43, respectively, and the mean bond strength was 1.57, satisfying the required performance. Therefore, the experimental results showed that in using the ground granulated blast furnace slag as an admixture for precast concrete, the cement replacement ratio may be increased up to 70% without causing any problems in securing the structural performance. Summarizing the results of the present study, a ground granulated blast furnace slag replacement ratio of 50% or lower may be reasonably applied.