Improving nanoplastic removal by coagulation: Impact mechanism of particle size and water chemical conditions.

Plastic particles may bring potential threats to the ecosystem. Coagulation, as a widely used method to remove particles, has been rarely studied for plastic particles in the nanometer range. In this work, the coagulation removal of polystyrene nanoplastic particles (PSNPs, 50-1000 nm) was conducted in a model system containing coagulants aluminum chlorohydrate (PAC) and polyacrylamide (PAM). The optimal removal efficiency (98.5%) was observed in the coagulation process at pH= 8.0, 0.4 g·L PAC and 20 mg·L PAM. The inhibition impact of humic acid was also noticed, due to its competitive adsorption with PSNPs onto flocs. The interaction energies between PSNPs and PAC were calculated by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory, which showed that electrical neutralization resulted in the difference of the remove efficiency in different sizes and coagulant concentrations. The formation of Al-O bond between PSNPs and PAC/PAM flocs promoted the removal of PSNPs. Excessive PAM (> 20 mg·L) increased clusters size and solution viscosity, which resulted in the settling of clusters being controlled by buoyancy and the reduced remove efficiency. The findings suggest that the chemical coagulation dominants the removal of NPs, and the coagulation efficiency can be optimized by choosing suitable coagulant and water chemical conditions.