Bond Strength of Acrylic Denture Tooth to a Novel Thermo-Polymerized Denture Base Copolymer Containing Cycloaliphatic Comonomer after Mechanical and Thermal Aging.

BACKGROUND

There are numerous artificial denture tooth materials available of which acrylic resin teeth were used widely. The resin teeth bond chemically to the denture base resin, and this bonding is affected by numerous intrinsic and extrinsic factors. The type of cross-linker in the denture base monomer is one such factor which has a questionable influence on the bond strength. Recently, cycloaliphatic comonomer was added in the methyl methacrylate monomer and the resultant novel copolymer possessed good physico-mechanical and biological properties.

PURPOSE

The purpose of this study was to evaluate the shear bond strength (SBS) between acrylic denture tooth and resultant novel copolymer after cyclic loading and thermal aging.

MATERIALS AND METHODS

Sixty central incisor denture teeth were bonded to three types of acrylic denture base resin groups ( = 20 per group) categorized based on the presence of the cycloaliphatic comonomer - Control group (G0): denture bases without cycloaliphatic comonomer and trial groups G10 and G20 contain 10 vol.% and 20 vol.% comonomer, respectively, substituted in the denture base monomer component. The specimens were processed and subjected to cyclic loading and thermal aging which was then followed by SBS testing.

RESULTS

G20 possessed the highest SBS followed by G10. G0 had the least SBS. All the specimens of the control and trial groups exhibited adhesive-cohesive mixed failure at the resin tooth-base resin interface.

CONCLUSION

The addition of cycloaliphatic comonomer increased the SBS between the resultant novel copolymer and the resin teeth after cyclic loading and thermal aging.