Layering contrasting photoselective filters improves the simulation of foliar shade.

BACKGROUND

Neutral density shade cloth is commonly used for simulating foliar shade, in which it reduces light intensity without altering spectral quality. However, foliar shade also alters spectral quality, reducing the ratio of red to far-red (R:FR) light, altering the ratio of blue to green (B:G) light, and reducing ultraviolet light. Unlike shade cloth, photoselective filters can alter spectral quality, but the filters used in previous literature have not simulated foliar shade well. We examined the spectral quality of sunlight under color temperature blue (CTB), plus green (PG), and neutral density (ND) filters from LEE Filters, Rosco e-colour + and Cinegel brands either alone or layered, hypothesizing that the contrasting filter qualities would improve simulations. As a proof-of-concept, we collected spectral data under foliar shade to compare to data collected under photoselective filters.

RESULTS

Under foliar shade reductions in the R:FR ratio ranged from 0.11 to 0.54 (~ 1.18 in full sun), while reductions in the B:G ratio were as low as 0.53 in deep shade, or were as high as 1.11 in moderate shade (~ 0.87 in full sun). Neutral density filters led to near-neutral reductions in photosynthetically active radiation and reduced the R:FR ratio similar to foliar shade. Color temperature blue filters simulated the increased B:G ratio observed under moderate foliar shade, but did not reduce the R:FR ratio low enough. On their own, PG filters did not simulate any type of foliar shade. Different brands of the same filter type also had disparate effects on spectral quality. Layered CTB and ND filters improved the accuracy of moderate foliar shade simulations, and layering CTB, PG, and ND filters led to accurate simulations of deep foliar shade.

CONCLUSIONS

Layering photoselective filters with contrasting effects on the spectral quality of sunlight results in more accurate simulations of foliar shade compared to when these filters are used separately. Layered filters can re-create the spectral motifs of moderate and deep foliar shade; they could be used to simulate shade scenarios found in different cropping systems. Photoselective filters offer numerous advantages over neutral density shade cloth and could be a direct replacement for researchers currently using neutral density shade cloth.